Team 365 TT51 - Men's Zone Performance Polo - Black

Same-Day Shipping on Orders Placed by 12 PM EST
White
Save 37%
Starting at
$8.80
Retail Price: $14.00
Colors
Save 37%
Starting at
$8.80
Retail Price: $14.00
FABRIC 100% polyester interlock
WEIGHT 3.5 oz./yd²
FIT men's team fit
Selected Color: Black8 colors
Choose Size
$8.80
In Stock
$8.80
In Stock
$8.80
In Stock
$8.80
In Stock
$8.80
In Stock
$10.05
In Stock
$12.57
In Stock
$13.82
In Stock
$15.08
In Stock
$16.34
In Stock
Size
Color

Description

The Team 365 TT51 Zone Performance Polo is a 3.5 oz (130 gsm) 100% polyester interlock built for high-volume team, league, and corporate uniform programs that need a wicking polo at the bottom of the polo price band. Where the heavier TT20 Charger carries 9% spandex for stretch, the TT51 runs straight 100% polyester with no elastane in the blend. That single spec is the print-shop angle: with no spandex fiber to reject disperse dye, the TT51 sublimates evenly across the whole panel rather than going heathered in stretch zones, which makes it the fully sublimatable member of the Team 365 polo line and the cheaper substrate when you are running large color-coordinated team orders.

Embroidery is the standard decoration route for a logo polo, and the 130 gsm interlock holds left-chest stitches with a clean, stable face. Use a cut-away stabilizer and a topping film on the lighter interlock so dense fills do not pull or pucker on the thin knit, and keep stitch counts moderate on a 3.5 oz ground. Sublimation is where the TT51 separates from cotton-blend and spandex-blend polos: the 100% polyester face takes full all-over and panel prints, brightest on White and lighter sport colors, with deeper sport grounds limited to tone-on-tone because the cationic base color shows through. DTF transfers bond at standard press time and temperature on the poly interlock and are the most consistent route across all 8 colorways, including the dark grounds where embroidery and DTF read best. Screen printing works with poly-friendly low-bleed plastisol cured at a low temperature to block dye migration from the cationic-dyed base, a real risk on Sport Red, Sport Royal, and Sport Dark Navy. Heat-transfer vinyl bonds at a lower press temp; use polyester-rated HTV and a lower platen setting to avoid scorching or driving migration. DTG is not a practical route, since pretreatment will not bond to a 100% polyester face. Water-based and discharge inks do not work on polyester.

  • Brand: Team 365
  • Style: TT51 (Men's Zone Performance Polo)
  • Fabric: 100% polyester interlock
  • Weight: approximately 3.5 to 3.8 oz / 130 gsm (figures vary by source; gsm is consistent across the channel)
  • Features: Moisture-wicking, UV protection, cationic dyes for superior brightness and color fastness
  • Construction: Self-fabric collar, three-button placket with dyed-to-match buttons, tear-away label
  • Fit: Men's team fit
  • Sizes: XS to 6XL
  • Colors available: 8 (White, Black, Sport Light Blue, Sport Royal, Sport Forest, Sport Red, Sport Graphite, Sport Dark Navy)
  • Case quantity: available per piece or per case; confirm the current case pack for your color and size run on the product page or with TheClothingSpace
  • Care: Machine wash cold, tumble dry low

The TT51 sits a price tier below the TT20 Charger and most poly-cotton pique polos, which is why it works for budget-driven volume jobs: school spirit programs, recreation leagues, and event staff runs where you are decorating hundreds of polos and per-unit cost drives the bid. The trade-off for that price is the lighter 130 gsm hand and the absence of stretch, so for athletic uniforms where range of motion is a spec, the TT20 is the better call. For logo-and-go corporate and team polos at the lowest entry cost, the TT51 is the workhorse. TheClothingSpace stocks the Team 365 TT51 at wholesale pricing with bulk discounts that increase with case and unit quantity, among the lowest prices online for this style, with fast US shipping on stocked colors.

Comparing wholesale performance polos for your next team or corporate program? Browse the full wholesale polo collection to see all available brands and styles.

Features

  • 100% preshrunk cotton
  • Made with sustainably and fairly grown USA cotton
  • Seamless rib at neck
  • Taped shoulder-to-shoulder
  • Double-needle stitching throughout
  • Tear-away label
  • Quarter-turned to eliminate center crease
  • 7/8" collar
  • Classic fit

Shipping & Returns

All Blank orders of $59 or more are shipped FREE same day via UPS Ground. Blank orders under $59 will qualify for the following shipping options:

  • USPS Blank Apparel Shipping (2-4 Business Days): $4.99
  • UPS Ground (1-2 Business Days): $8.99

Read our Shipping Policy for more information.

Fill out the Blank Apparel Return Form within 30 days of the order date to be eligible for a refund or return.

Note: All blank orders shipped outside of the continental US are not eligible for return, exchange, or refund.

Decoration Method Compatibility

How this blank performs across popular decoration methods.

Method Compatible Notes
Embroidery Standard route for logo polos. 130 gsm interlock holds left-chest stitches. Use cut-away stabilizer and topping film, keep stitch counts moderate on the lighter 3.5 oz knit to avoid pucker.
Sublimation 100% polyester with no spandex sublimates evenly across the full panel, no heathered stretch zones. Brightest on White and lighter sport colors. Deep sport grounds limited to tone-on-tone as cationic base shows through.
DTF Transfer Standard press time and temp on poly interlock. Most consistent route across all 8 colorways, including dark grounds.
Screen Print (Plastisol) Use poly-friendly low-bleed plastisol and low cure temp to block dye migration from the cationic-dyed base. Watch Sport Red, Sport Royal, Sport Dark Navy.
Vinyl / HTV Use polyester-rated HTV at a lower press temp to avoid scorching or driving dye migration. Suited to names, numbers, and small marks.
DTG Pretreatment will not bond to a 100% polyester face. Route to sublimation or DTF.
Water-based / Discharge Polyester does not absorb water-based inks or discharge agents. Not viable on this substrate.

How Does the Team 365 TT51 Compare?

SpecTeam 365 TT51Team 365 TT20Devon & Jones DG20
Starting At$8.43$11.04$15.70
Weight3.5 oz5.3 oz5.1 oz
Yarn / Fabric100% polyester interlock91/9 poly/spandex61/39 poly/cotton plaited mesh pique
FitMen's team fit (XS-6XL)Men's athletic, stretchMen's standard (XS-6XL)
ConstructionFlat interlock, self-fabric collar, three-button placket, cationic-dyedPointelle mesh side panels, self-fabric collarDual-sided mesh pique, three-button placket, UV 15-39
Best ForBudget sublimation and embroidered logo polos for high-volume team programsAthletic uniforms needing stretch and a heavier handEmbroidered corporate and hospitality polos with a softer cotton-back interior

Fabric Blend by Color Group

Not all colorways share the same fabric composition. Check the blend before ordering for decoration jobs where substrate matters.

Color Group Blend Print Consideration
White and lighter sport colors (White, Sport Light Blue, Sport Graphite) 100% polyester interlock, 3.5 oz / 130 gsm Sublimation prints brightest here, full panel coverage with no spandex heathering. DTF and embroidery both clean on light grounds.
Saturated and dark sport colors (Black, Sport Royal, Sport Red, Sport Forest, Sport Dark Navy) 100% polyester interlock, 3.5 oz / 130 gsm DTF most consistent on dark grounds. Embroidery reads well with dyed-to-match or contrast thread. Screen plastisol requires low-bleed ink and low cure temp to block migration from the cationic base.

Frequently Asked Questions

Yes. The Team 365 TT51 is 100% polyester interlock with no spandex in the blend, so disperse dye bonds evenly across the full panel without the heathered stretch zones you get on spandex-blend polos. Sublimation prints brightest on White and lighter sport colors. Deeper sport grounds limit sublimation to tone-on-tone designs because the cationic base color shows through.
The Team 365 TT51 is 100% polyester interlock at roughly 3.5 to 3.8 oz, a consistent 130 gsm across the wholesale channel. The fabric is moisture-wicking with UV protection and uses cationic dyes for superior brightness and wash fastness. It is one of the lighter performance polos in the wholesale polo channel.
Yes. Embroidery is the standard route for a logo polo and the 130 gsm interlock holds left-chest stitches with a stable face. Use a cut-away stabilizer and a topping film on the lighter knit, and keep stitch counts moderate on the 3.5 oz ground so dense fills do not pull or pucker. Dyed-to-match buttons allow coordinated placement opposite the three-button placket.
The TT51 is 3.5 oz 100% polyester interlock and the lower-priced, fully sublimatable option for high-volume logo and team programs. The TT20 Charger is 5.3 oz 91/9 poly/spandex with pointelle mesh panels and four-way stretch for athletic uniforms. Choose the TT51 for budget-driven volume and even sublimation; choose the TT20 when stretch and a heavier hand are part of the spec.
Screen printing works, but requires poly-friendly low-bleed plastisol ink and a lower cure temperature to prevent dye migration from the cationic-dyed base. This matters most on Sport Red, Sport Royal, and Sport Dark Navy. For dark-ground decoration across all colorways, DTF transfers are usually the more consistent route. Water-based and discharge inks will not work on polyester.
Yes. TheClothingSpace stocks the Team 365 TT51 at wholesale pricing with bulk discounts that increase with case and unit quantity, among the lowest prices online for this style. Stocked colors ship fast within the US, which keeps lead times short for school spirit, recreation league, event staff, and corporate polo programs.