Jerzees 29M - Unisex DRI-POWER® ACTIVE T-Shirt - Irish Green Heather

The Jerzees 29M is the Dri-Power Active T-Shirt, a 5.6 oz 50/50 cotton/polyester blank and one of the lowest-priced workhorse tees in the trade. What separates it from a plain cotton value tee is the Dri-Power finish: the 50/50 jersey is built to move moisture, so the shirt wicks and dries rather than soaking and clinging, which is why it is the tee a shop reaches for when a job needs an athletic-leaning blank at a rock-bottom unit cost. That makes it the default for team practice and PE shirts, sports and rec-league merch, camp and event giveaways, and any high-volume screen-print run where the cheapest wicking 50/50 tee decides the order.

The 29M prints like a value 50/50 tee with the one trap every blend carries: the polyester half wants to migrate under heat. For screen printing, which is the method this tee is built for, the smooth quarter-turned jersey and wide seamless body give a clean canvas that holds bold spot colour; on dark colours lay a grey poly-blocking underbase and cure at the lowest effective temperature so the dye does not bleed into the ink. For DTF, the transfer bonds to the jersey face at standard heat-press settings; on the darker colours use a low-bleed film and a controlled press temperature to keep migration out of the print. For embroidery, the 5.6 oz body is a stable base for a left-chest design with a cut-away backing. For DTG, the 50/50 blend migrates and prints more muted than a 100% cotton tee, so it is workable on the lighter colours with a blend pre-treat but is not the tee's strength. For vinyl and HTV, solid heat-transfer vinyl holds on the smooth face when pressed at a controlled temperature to limit dye bleed on the darks. Two methods do not apply: water-based discharge needs the dye to strip from 100% cotton, which the 50/50 polyester will not do, leaving only a faded tonal result, and the cotton-dominant blend is not a polyester sublimation substrate.

• Brand: Jerzees
• Style: 29M (Jerzees Dri-Power Active Adult T-Shirt, current manufacturer style 29MR)
• Fabric: 50% cotton, 50% polyester pre-shrunk jersey with Dri-Power moisture management; Ash and Oxford colours carry more polyester
• Weight: 5.6 oz/yd2
• Construction: 50/50 pre-shrunk jersey, quarter-turned to reduce centre crease. 1x1 ribbed seamless collar. Shoulder-to-shoulder tape. Seamless body for a wide print area. Double-needle stitched sleeves, bottom hem and front neck. Tear-away label.
• Fit: Unisex classic fit
• Sizes: S, M, L, XL, 2XL, 3XL, 4XL, 5XL
• Colors available: 40+ colours across solids, ash and oxford heathers, and safety colours (check current availability on the product page)
• Ordering: available by the piece or by the case; confirm current packing per case for your colour and size before a large order
• Care: Machine wash cold. Tumble dry low.

The reorder note specific to this style: the solid colours run a true 50/50 while Ash and Oxford carry more polyester, so confirm whether your colour is a solid or a heather before a repeat run, because the poly-rich colours migrate more and need a heavier underbase and a lower cure. Pair the 29M with the Gildan G800 DryBlend when a program cross-shops 50/50 tees on a similar weight, and step across to the Hanes 5170 EcoSmart when a job wants a recycled-poly 50/50 in the same value class. For a 100% cotton alternative at a close price, the Gildan G500 Heavy Cotton trades the wicking for a solid cotton print face. TheClothingSpace stocks the 29M at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.

Comparing value 50/50 blank tees for your decoration method? Browse all wholesale blank t-shirts.