Hanes P180 - EcoSmart® 50/50 Full-Zip Hoodie - Deep Red

The Hanes P180 is the EcoSmart 50/50 Full-Zip Hooded Sweatshirt, a 7.8 oz fleece built on the patented PrintPro XP construction that delivers a high-stitch-density, low-pill print face. The PrintPro XP surface is the practical differentiator here: that tighter knit gives a smoother ground for screen printing and DTF than a standard open fleece, so halftone dots hold their shape and fine-line art reads cleaner than on a basic 50/50. The full-zip front runs a standard zipper with split pouch pockets and a single-ply hood with a dyed-to-match drawcord. Triple-needle top coverstitching reinforces the cuffs, waistband, pockets and hood. The body runs a unisex classic fit in S-3XL with rib knit cuffs and waistband and a tear-away label. Up to 5% of the polyester comes from recycled plastic bottles, a verifiable eco detail for print shops that field sustainability questions from end clients.

On a full-zip hoodie the decoration plan starts with the back, since the zipper runs the full front centre line. The full back is the largest clean canvas for screen print or DTF, and a left-chest hit sits opposite the zip pull for a logo placement that clears the placket. DTF is the most versatile single method on the P180: the PrintPro XP face bonds the film cleanly, stays consistent across all 9 colours in the card, and lets a decorator run one artwork file for the full order without adjusting for substrate changes. Screen printing suits bold and mid-detail art on the high-stitch face. Lay a white underbase on the coloured grounds and run a low cure to stop the polyester from migrating dye into the ink film. The back panel and left chest give the best registration, and keep fine detail off the zipper teeth on any full-front attempt. Embroidery works well on the 7.8 oz body: the dense PrintPro XP fleece holds a left-chest logo with a cut-away backing placed opposite the zip, and the high-stitch face resists pilling around the needle penetrations. Vinyl and HTV bond with a firm press for names, numbers and lettering on the back or chest. DTG is not a practical route, since the 50% polyester mutes the ink, the fleece body fights the platen, and the zip placket blocks a flat chest print. Discharge does not work on a 50/50 ground. Sublimation does not apply, since the cotton content will not hold the disperse dye.

• Brand: Hanes
• Style: P180 (EcoSmart 50/50 Full-Zip Hooded Sweatshirt)
• Weight: 7.8 oz
• Fabric: 50/50 cotton/polyester PrintPro XP fleece, high-stitch-density low-pill face; up to 5% recycled polyester from plastic bottles
• Construction: full-zip front, single-ply hood with dyed-to-match drawcord, split pouch pockets, triple-needle top coverstitching along cuffs waistband pockets and hood, rib knit cuffs and waistband, tear-away label
• Fit: unisex classic fit
• Sizes: S-3XL
• Colors available: 9 shades including White, Black, Navy, Deep Red, Deep Royal, Light Steel, Ash, Maroon and Deep Forest (check current availability on the product page)
• Ordering: available by the piece or by the case with no rigid minimum; confirm current case packing per colour before a large order
• Care: Machine wash cold, inside out. Tumble dry low. Do not iron decoration or zipper.

The reorder note for the P180: all 9 colours run the same 50/50 blend, so a print or embroidery recipe carries across the entire colour card without adjusting the underbase weight or cure temperature by colour. That uniformity simplifies reorders, since a shop can lock one screen setup or one DTF profile and run every shade on the same settings. The PrintPro XP face holds its stitch density and low-pill surface across production runs, so the print quality stays consistent from the first case to the reorder. TheClothingSpace stocks the P180 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.

Building a matched EcoSmart fleece program? Browse all wholesale hoodies.