Gildan G123 - Adult DryBlend® Adult 9 oz., 50/50 Open-Bottom Sweatpants - Sports Gray

Same-Day Shipping on Orders Placed by 12 PM EST
White
Starting at
$0.00
Colors
Save 25%
Starting at
$17.48
Retail Price: $23.18
FIT unisex, classic fit, slightly tapered open-bottom sweatpant
Selected Color: Sports Gray8 colors
Choose Size
$17.74
Out of Stock
$17.74
Out of Stock
$17.74
Out of Stock
$17.74
Out of Stock
$21.00
Out of Stock
Size
Color

Description

The Gildan G123 is the DryBlend Open-Bottom Sweatpant, a 9 oz 50/50 cotton/poly fleece bottom built around Gildan's DryBlend moisture-wicking technology. DryBlend pulls moisture away from the body into the polyester side of the fleece, which means this pant performs in gym, warm-up, and active contexts where a standard Heavy Blend fleece would sit damp. The air jet yarn gives the face a soft, pill-resistant finish that holds up across wash cycles, and the slightly tapered open-bottom legs keep their shape rather than riding up or bunching at the ankle. The covered elastic waistband with an interior drawcord, jersey-lined sideseam pockets, differential rise for a better seated fit, and double-needle bottom hems round out a fleece pant that runs equally well in team warm-ups, school spirit-wear programs, gym kits, and staff uniform bottoms.

Decorating the G123 follows the same placement rule as any fleece pant: the print lands on the hip or thigh, and the sideseam pockets plus the elastic waistband set the boundaries. For DTF, the transfer bonds to the 50/50 DryBlend fleece face at standard heat-press settings and is the most practical route on a pant, ideal for a hip logo or a leg-length name and number run; set the press firmly so the transfer seats into the brushed nap and keep the placement clear of the pocket seam. For embroidery, the 9 oz DryBlend fleece takes a hip or thigh design hooped over a cut-away backing at moderate stitch density; the heavier 9 oz body carries more thread weight than a lighter 7.8 oz fleece without distortion. For screen printing, load a single pant leg onto a sleeve or leg platen to print flat: lay a poly-blocking underbase on the dark and navy colours, cure at a moderate-to-low temperature, and lay a slightly thicker ink deposit so the brushed nap does not show through. For vinyl, the flat hip and thigh panel presses names and numbers cleanly at a controlled temperature with a firm press. For DTG, the 50% cotton holds pre-treat, but the tubular pant leg is hard to lay flat on a DTG platen, so DTF or screen is the realistic route for fleece bottoms. Water-based and discharge inks are limited here, since the 50% polyester will not discharge and leaves only a faded tonal result.

  • Brand: Gildan
  • Style: G123 / 12300 (DryBlend Open-Bottom Sweatpants with Pockets)
  • Fabric: 50% cotton / 50% polyester DryBlend fleece with air jet yarn
  • Weight: 9 oz/yd2
  • Technology: DryBlend moisture-wicking moves moisture away from the body into the polyester side
  • Construction: Covered elastic waistband with drawcord, jersey-lined sideseam pockets, slightly tapered open-bottom legs, differential rise for better fit, double-needle bottom hems, tear-away label
  • Fit: Unisex classic fit, slightly tapered open-bottom leg
  • Sizes: S, M, L, XL, 2XL, 3XL
  • Colors available: 8 colours across solids and heathers (check current availability on the product page)
  • Ordering: available by the piece or by the case (typically packed by the dozen); wholesale pricing with bulk discounts on multi-case orders
  • Care: Machine wash cold. Tumble dry low.

The reorder note for the Gildan G123: the DryBlend moisture-wicking finish is the key differentiator over a standard Heavy Blend fleece pant, so if your program needs a performance fleece bottom that stays dry during warm-ups and activity, the G123 is the blank that delivers it. Place the print on the hip or thigh clear of the sideseam pockets and waistband, favour DTF or embroidery on the DryBlend fleece face, and plan a sleeve or leg platen if the order calls for screen printing a single leg flat. Pair it with the Gildan G125 DryBlend Hoodie or the Gildan G120 DryBlend Crewneck from the same DryBlend family to run a matched moisture-wicking fleece set in one colour family. For a budget fleece bottom without the moisture-wicking finish, the Gildan G182 Heavy Blend Sweatpant runs the same 50/50 fleece at a lower price point. TheClothingSpace stocks the Gildan G123 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.

Building a matched DryBlend fleece program for your decoration method? Browse all wholesale blank sweatshirts.

Features

  • 100% preshrunk cotton
  • Made with sustainably and fairly grown USA cotton
  • Seamless rib at neck
  • Taped shoulder-to-shoulder
  • Double-needle stitching throughout
  • Tear-away label
  • Quarter-turned to eliminate center crease
  • 7/8" collar
  • Classic fit

Shipping & Returns

All Blank orders of $59 or more are shipped FREE same day via UPS Ground. Blank orders under $59 will qualify for the following shipping options:

  • USPS Blank Apparel Shipping (2-4 Business Days): $4.99
  • UPS Ground (1-2 Business Days): $8.99

Read our Shipping Policy for more information.

Fill out the Blank Apparel Return Form within 30 days of the order date to be eligible for a refund or return.

Note: All blank orders shipped outside of the continental US are not eligible for return, exchange, or refund.

Decoration Method Compatibility

How this blank performs across popular decoration methods.

Method Compatible Notes
DTF Transfer the transfer bonds to the 50/50 DryBlend fleece face at standard heat-press settings; the most forgiving and most practical route on a pant for a hip logo or a leg-length name and number, set firmly so it seats into the brushed nap and laid flat clear of the sideseam pocket
Embroidery the 9 oz DryBlend fleece takes a hip or thigh design hooped over a cut-away backing at moderate stitch density; the heavier 9 oz body carries more thread weight than a lighter 7.8 oz fleece without distortion
Screen Print (Plastisol) the 50/50 fleece takes plastisol, but load a single leg onto a sleeve or leg platen to print flat; lay a poly-blocking underbase on dark and navy colours, cure moderate-to-low, and lay a slightly thicker ink deposit so the brushed nap does not show through
Vinyl / HTV the flat hip and thigh panel presses names and numbers cleanly at a controlled temperature with a firm press so the vinyl seats into the nap
DTG the 50% cotton holds pre-treat, but the tubular pant leg is hard to lay flat on a DTG platen, so DTF or screen is the realistic route for fleece bottoms
Screen Print (Water-based / Discharge) the 50% polyester will not discharge and leaves only a faded tonal result, so water-based and discharge are not reliable on this DryBlend fleece
Sublimation the cotton content and the dyed coloured fleece make this blend unsuitable as a sublimation substrate

How Does the Gildan G123 DryBlend Sweatpant Compare?

SpecGildan G123Gildan G182Port & Company PC78P
Starting At$17.48$10.24$15.83
Weight9 oz8 oz7.8 oz
Yarn / Fabric50/50 cotton/poly DryBlend50/50 cotton/poly Heavy Blend50/50 cotton/poly Core Fleece
FitUnisex, classic, slightly tapered open-bottomUnisex, classic, elastic bottomUnisex, classic, open-bottom
ConstructionDryBlend moisture-wicking, drawcord waist, jersey-lined pockets, differential riseHeavy Blend fleece, elastic waist, no pockets (standard)Core fleece, drawcord waist, side pockets, open-bottom
Best ForActive/warm-up programs needing moisture-wicking fleece bottomsBudget fleece bottom for casual or spirit-wear programsMatched fleece set with PC78 crew or PC78H hoodie

Fabric Blend by Color Group

Not all colorways share the same fabric composition. Check the blend before ordering for decoration jobs where substrate matters.

Color Group Blend Print Consideration
Solid colours (Black, Navy, Royal, Red, Cardinal Red) 50/50 cotton/polyester DryBlend fleece Standard poly-block underbase and moderate cure on darks; DTF presses clean on the hip and thigh panel
Sports Gray and Ash 50/50 cotton/polyester DryBlend fleece (heather tones may carry different cotton/poly ratios on some Gildan fleece lines; confirm the care label if migration-sensitive) Lighter grounds take a standard cure; cross-dyed heather look covers with a single underbase
Charcoal 50/50 cotton/polyester DryBlend fleece Dark ground takes a poly-block underbase for light inks and a moderate cure

Frequently Asked Questions

The Gildan G123 DryBlend Open-Bottom Sweatpant is 9 oz/yd2 of 50% cotton / 50% polyester DryBlend fleece with air jet yarn for a soft, pill-resistant face. DryBlend technology wicks moisture away from the body into the polyester side, keeping the wearer drier than a standard cotton/poly fleece. Construction includes a covered elastic waistband with drawcord, jersey-lined sideseam pockets, slightly tapered open-bottom legs, and double-needle bottom hems.
Because the Gildan G123 is a pant with no chest panel, the print lands on the hip or thigh. A small hip logo above the sideseam pocket is the natural placement, and a leg-length name and number runs down the outer thigh. Keep the print clear of the jersey-lined sideseam pockets and the elastic waistband, and load a single leg onto a sleeve or leg platen to screen print it flat.
DTF and embroidery are the cleanest routes on the Gildan G123. DTF is the most practical method for a hip logo or a leg-length name and number because the transfer bonds to the DryBlend fleece face at standard heat-press settings. Embroidery hoops a hip or thigh design at moderate stitch density, and the 9 oz body carries thread weight without distortion. The tubular pant leg is hard to lay flat on a DTG platen, so DTF or screen is the realistic route.
The Gildan G123 uses DryBlend moisture-wicking technology that pulls moisture into the polyester side of the fleece, keeping the wearer drier during warm-ups and activity. The G182 Heavy Blend is a standard 50/50 fleece without moisture management. The G123 also carries a heavier 9 oz body (vs 8 oz on the G182), jersey-lined sideseam pockets, a differential rise for a better seated fit, and slightly tapered open-bottom legs.
Yes. The Gildan G123 shares the 50/50 DryBlend fleece and colour family with the Gildan G125 DryBlend Hoodie and the Gildan G120 DryBlend Crewneck, so the same artwork, colour, and moisture-wicking performance land on a top and a bottom for a matched DryBlend set. This makes it practical for team warm-ups, school spirit-wear, and uniform programs that need a coordinated fleece program.
Yes. TheClothingSpace stocks the Gildan G123 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style. It is available by the piece or the case, and pricing improves on multi-case and full-program orders. Stocked colours ship fast within the US, which keeps lead times short on team and uniform fleece runs.