Gildan G123 - Adult DryBlend® Adult 9 oz., 50/50 Open-Bottom Sweatpants - Charcoal
Selected Color: Charcoal8 colors
Choose Size
Description
The Gildan G123 is the DryBlend Open-Bottom Sweatpant, a 9 oz 50/50 cotton/poly fleece bottom built around Gildan's DryBlend moisture-wicking technology. DryBlend pulls moisture away from the body into the polyester side of the fleece, which means this pant performs in gym, warm-up, and active contexts where a standard Heavy Blend fleece would sit damp. The air jet yarn gives the face a soft, pill-resistant finish that holds up across wash cycles, and the slightly tapered open-bottom legs keep their shape rather than riding up or bunching at the ankle. The covered elastic waistband with an interior drawcord, jersey-lined sideseam pockets, differential rise for a better seated fit, and double-needle bottom hems round out a fleece pant that runs equally well in team warm-ups, school spirit-wear programs, gym kits, and staff uniform bottoms.
Decorating the G123 follows the same placement rule as any fleece pant: the print lands on the hip or thigh, and the sideseam pockets plus the elastic waistband set the boundaries. For DTF, the transfer bonds to the 50/50 DryBlend fleece face at standard heat-press settings and is the most practical route on a pant, ideal for a hip logo or a leg-length name and number run; set the press firmly so the transfer seats into the brushed nap and keep the placement clear of the pocket seam. For embroidery, the 9 oz DryBlend fleece takes a hip or thigh design hooped over a cut-away backing at moderate stitch density; the heavier 9 oz body carries more thread weight than a lighter 7.8 oz fleece without distortion. For screen printing, load a single pant leg onto a sleeve or leg platen to print flat: lay a poly-blocking underbase on the dark and navy colours, cure at a moderate-to-low temperature, and lay a slightly thicker ink deposit so the brushed nap does not show through. For vinyl, the flat hip and thigh panel presses names and numbers cleanly at a controlled temperature with a firm press. For DTG, the 50% cotton holds pre-treat, but the tubular pant leg is hard to lay flat on a DTG platen, so DTF or screen is the realistic route for fleece bottoms. Water-based and discharge inks are limited here, since the 50% polyester will not discharge and leaves only a faded tonal result.
- Brand: Gildan
- Style: G123 / 12300 (DryBlend Open-Bottom Sweatpants with Pockets)
- Fabric: 50% cotton / 50% polyester DryBlend fleece with air jet yarn
- Weight: 9 oz/yd2
- Technology: DryBlend moisture-wicking moves moisture away from the body into the polyester side
- Construction: Covered elastic waistband with drawcord, jersey-lined sideseam pockets, slightly tapered open-bottom legs, differential rise for better fit, double-needle bottom hems, tear-away label
- Fit: Unisex classic fit, slightly tapered open-bottom leg
- Sizes: S, M, L, XL, 2XL, 3XL
- Colors available: 8 colours across solids and heathers (check current availability on the product page)
- Ordering: available by the piece or by the case (typically packed by the dozen); wholesale pricing with bulk discounts on multi-case orders
- Care: Machine wash cold. Tumble dry low.
The reorder note for the Gildan G123: the DryBlend moisture-wicking finish is the key differentiator over a standard Heavy Blend fleece pant, so if your program needs a performance fleece bottom that stays dry during warm-ups and activity, the G123 is the blank that delivers it. Place the print on the hip or thigh clear of the sideseam pockets and waistband, favour DTF or embroidery on the DryBlend fleece face, and plan a sleeve or leg platen if the order calls for screen printing a single leg flat. Pair it with the Gildan G125 DryBlend Hoodie or the Gildan G120 DryBlend Crewneck from the same DryBlend family to run a matched moisture-wicking fleece set in one colour family. For a budget fleece bottom without the moisture-wicking finish, the Gildan G182 Heavy Blend Sweatpant runs the same 50/50 fleece at a lower price point. TheClothingSpace stocks the Gildan G123 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.
Building a matched DryBlend fleece program for your decoration method? Browse all wholesale blank sweatshirts.
Features
- 100% preshrunk cotton
- Made with sustainably and fairly grown USA cotton
- Seamless rib at neck
- Taped shoulder-to-shoulder
- Double-needle stitching throughout
- Tear-away label
- Quarter-turned to eliminate center crease
- 7/8" collar
- Classic fit
Shipping & Returns
All Blank orders of $59 or more are shipped FREE same day via UPS Ground. Blank orders under $59 will qualify for the following shipping options:
- USPS Blank Apparel Shipping (2-4 Business Days): $4.99
- UPS Ground (1-2 Business Days): $8.99
Read our Shipping Policy for more information.
Fill out the Blank Apparel Return Form within 30 days of the order date to be eligible for a refund or return.
Note: All blank orders shipped outside of the continental US are not eligible for return, exchange, or refund.

Decoration Method Compatibility
How this blank performs across popular decoration methods.
| Method | Compatible | Notes |
|---|---|---|
| DTF Transfer | ✓ | the transfer bonds to the 50/50 DryBlend fleece face at standard heat-press settings; the most forgiving and most practical route on a pant for a hip logo or a leg-length name and number, set firmly so it seats into the brushed nap and laid flat clear of the sideseam pocket |
| Embroidery | ✓ | the 9 oz DryBlend fleece takes a hip or thigh design hooped over a cut-away backing at moderate stitch density; the heavier 9 oz body carries more thread weight than a lighter 7.8 oz fleece without distortion |
| Screen Print (Plastisol) | ✓ | the 50/50 fleece takes plastisol, but load a single leg onto a sleeve or leg platen to print flat; lay a poly-blocking underbase on dark and navy colours, cure moderate-to-low, and lay a slightly thicker ink deposit so the brushed nap does not show through |
| Vinyl / HTV | ✓ | the flat hip and thigh panel presses names and numbers cleanly at a controlled temperature with a firm press so the vinyl seats into the nap |
| DTG | ✓ | the 50% cotton holds pre-treat, but the tubular pant leg is hard to lay flat on a DTG platen, so DTF or screen is the realistic route for fleece bottoms |
| Screen Print (Water-based / Discharge) | ✗ | the 50% polyester will not discharge and leaves only a faded tonal result, so water-based and discharge are not reliable on this DryBlend fleece |
| Sublimation | ✗ | the cotton content and the dyed coloured fleece make this blend unsuitable as a sublimation substrate |
How Does the Gildan G123 DryBlend Sweatpant Compare?
| Spec | Gildan G123 | Gildan G182 | Port & Company PC78P |
|---|---|---|---|
| Starting At | $17.48 | $10.24 | $15.83 |
| Weight | 9 oz | 8 oz | 7.8 oz |
| Yarn / Fabric | 50/50 cotton/poly DryBlend | 50/50 cotton/poly Heavy Blend | 50/50 cotton/poly Core Fleece |
| Fit | Unisex, classic, slightly tapered open-bottom | Unisex, classic, elastic bottom | Unisex, classic, open-bottom |
| Construction | DryBlend moisture-wicking, drawcord waist, jersey-lined pockets, differential rise | Heavy Blend fleece, elastic waist, no pockets (standard) | Core fleece, drawcord waist, side pockets, open-bottom |
| Best For | Active/warm-up programs needing moisture-wicking fleece bottoms | Budget fleece bottom for casual or spirit-wear programs | Matched fleece set with PC78 crew or PC78H hoodie |
Fabric Blend by Color Group
Not all colorways share the same fabric composition. Check the blend before ordering for decoration jobs where substrate matters.
| Color Group | Blend | Print Consideration |
|---|---|---|
| Solid colours (Black, Navy, Royal, Red, Cardinal Red) | 50/50 cotton/polyester DryBlend fleece | Standard poly-block underbase and moderate cure on darks; DTF presses clean on the hip and thigh panel |
| Sports Gray and Ash | 50/50 cotton/polyester DryBlend fleece (heather tones may carry different cotton/poly ratios on some Gildan fleece lines; confirm the care label if migration-sensitive) | Lighter grounds take a standard cure; cross-dyed heather look covers with a single underbase |
| Charcoal | 50/50 cotton/polyester DryBlend fleece | Dark ground takes a poly-block underbase for light inks and a moderate cure |



