Flexfit 6477 - Unisex Wool Blend Cap - Maroon

The Flexfit 6477 is the Flexfit Wool Blend, the structured six-panel cap that pairs the brand's stretch-fitted sweatband with an 83% acrylic / 15% wool / 2% spandex front so it shapes to the head without a snapback or velcro strap. It runs a hard buckram-backed front, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor with a silver underbill and 8 rows of stitching, so it holds a logo flat and upright the way a structured fitted cap should. That makes it the cap a shop reaches for when a program wants the clean fitted silhouette with no adjustable hardware on the back: retail hat brands, team and league caps, premium corporate headwear, and any custom run where the fitted look and the wool-blend hand decide the order over a trucker or a snapback.

Decorating a structured fitted cap is a different discipline from printing a flat tee, and the 6477 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look. Embroidery is the primary method on this cap because the acrylic-wool blend takes a needle cleanly and the dense knit hides the backing. The fast-growing alternative is the leather or faux-leather patch heat-pressed onto the front panel with a heat-activated adhesive and usually tack-stitched for durability; woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but the acrylic-wool blend is heat-sensitive, so keep the platen temperature on the low side, use a short dwell, and protect the cap with a cover sheet to avoid scorching or glazing the knit. Sublimation does not take on this cap because there is no white polyester panel to receive the dye.

• Brand: Flexfit
• Style: 6477 (Flexfit Wool Blend Cap)
• Construction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor with silver underbill and 8 rows of stitching. Closed back.
• Fabric: 83% acrylic / 15% wool / 2% PU spandex (white runs 98% acrylic / 2% PU spandex with no wool)
• Profile: Mid-profile
• Closure: Stretch-fitted, no adjustable strap. Flexfit elastic sweatband flexes to the head
• Sizes: S/M fits 6 7/8 to 7 1/4 inch head circumference; L/XL fits 7 1/4 to 7 5/8 inch
• Fit: Unisex stretch-fitted; order the size range your customers wear, not one-size
• Colors available: 13 colours (check current availability on the product page)
• Ordering: available by the piece or by the case; standard master case is 144 units. Confirm current packing per size and colour before a large order
• Care: Spot clean. Do not machine wash structured caps.

The reorder and ordering note specific to this style: because the 6477 is a true fitted cap with no adjustable back, you order across two sizes (S/M and L/XL) rather than one OSFA SKU, so plan the split between sizes for your audience before a run. The white 6477 drops the wool and runs 98% acrylic, so confirm the exact colour if the wool hand matters to the brief, and lock the colourway before a repeat run since the acrylic-wool yarn can shade slightly between dye lots. If a program needs a single one-size cap instead, cross-shop the adjustable Flexfit 110; if it wants the same fitted silhouette at a different fabric hand, the Flexfit 6277 Wooly Combed runs the same six-panel fitted build in a poly-cotton blend. TheClothingSpace stocks the 6477 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.

Building a custom fitted cap program? Browse all wholesale blank hats and headwear.