Valucap VC300A - Unisex Bio-Washed Classic Dad’s Cap - Khaki

The Valucap VC300A is the Bio-Washed Classic Dad's Cap, an unstructured low-profile six-panel cap in 100% cotton chino twill that runs at one of the lowest unit costs of any decorator dad cap. The bio-wash is the point: the cap ships pre-washed for a soft, broken-in hand and a slightly faded vintage face straight out of the case, so a finished cap reads retail without a separate garment-wash step, while the unstructured soft front collapses to a low profile rather than standing up like a structured trucker. That makes it the cap a shop reaches for when a program wants a high-volume blank dad cap at a value price, the default for embroidered merch lines, festival and event caps, streetwear and band programs, and any run where a soft vintage hand and a low unit cost decide the order over a premium structured cap.

The VC300A is built for embroidery first, and the unstructured soft front is the one fact that decides the method. For flat embroidery, the bio-washed chino twill takes a clean 2D logo on the front panel, the soft hand letting the stitch settle flat for a sharp left-front or center-front design, the primary and most consistent method on this cap. For 3D puff embroidery, the unstructured low-profile front has no buckram or foam backing to hold a raised stitch, so puff collapses on the soft panel, route raised puff work to a structured foam-front cap instead. For a leather or PU patch, a laser-cut patch heat-presses or stitches clean onto the flat front panel, the bio-washed twill taking a solid bond for a retail patch-cap look. For a woven or embroidered patch, the same flat front sews or heat-presses a patch cleanly. For DTF and heat transfer, a transfer applies with a curved cap heat-press platen at a controlled temperature, and the flat low dad-cap front suits a transfer better than a tall structured crown, lay a white base under the print on the dark colours. Screen printing does not apply, since the curved seamed cap panel is not a flat screen-printable surface, route flat artwork to embroidery or DTF. Sublimation does not apply, since the 100% cotton chino twill is not a polyester sublimation substrate.

• Brand: Valucap
• Style: VC300A (Valucap Adult Bio-Washed Classic Dad's Cap)
• Fabric: 100% cotton bio-washed chino twill
• Profile: Unstructured, low-profile, six-panel
• Construction: Pre-curved visor. Self-fabric tri-glide buckle closure with antique brass slider. Six sewn eyelets. Tear-away label.
• Fit: One size, adjustable (fits approximately 6 5/8 to 7 3/8)
• Visor: 2 3/4 inch pre-curved bill; crown height approximately 3 inches
• Colors available: 30+ colours across solids and bio-washed shades (check current availability on the product page)
• Ordering: available by the piece or by the case; confirm current packing per case for your colour before a large order
• Care: Spot clean or hand wash cold. Air dry to hold the bio-washed shape.

The reorder note specific to this style: the bio-wash gives every cap a soft faded face, so confirm your colour reads consistently across lots before a repeat run, since a washed-down shade can vary slightly between dye batches, and match your embroidery thread or transfer base to the panel colour, a light or metallic thread on the dark caps and an opaque white base under DTF on the darks. Pair the VC300A with the premium Yupoong 6245CM Low-Profile Cotton Twill Dad Cap when a program wants a heavier classic dad cap on the same artwork, and cross-shop the Big Accessories BX001 6-Panel Brushed Twill Unstructured Cap when a job wants an even lower unit cost. TheClothingSpace stocks the VC300A at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.

Building an embroidered headwear program? Browse all wholesale blank caps and headwear.