LAT 6965LA - Harborside Melange French Terry Pullover - Mauvelous Melange

The LAT 6965LA is the Harborside Melange French Terry Pullover, a lightweight poly-majority crewneck built around a melange heathered surface and self-fabric textured loop elbow patches. Every colour in the range is a melange yarn, so the entire body reads as a soft heathered texture rather than a flat solid, and the 68/32 polyester/combed ring-spun cotton blend at 6.2 oz sits lighter than a standard 50/50 fleece crew. That lighter weight and the fashion-forward elbow patches position this blank for boutique resale, branded lifestyle lines, resort and hospitality uniforms, and decorated programs where a relaxed retail look outweighs a thick fleece body. The flatlock stitching across the side seams, collar, cuffs and bottom band keeps the inside smooth against the skin, and the self-fabric reverse textured loop details on the collar, cuffs and bottom band add a tonal contrast that reads retail without any decoration at all.

The 68% polyester majority in the LAT 6965LA sets the decoration rules for this body. DTF is the primary route: the transfer bonds cleanly to the poly/cotton french terry at standard heat-press settings, the melange surface adds a subtle texture behind the print, and DTF handles the full colour card without migration risk. For screen printing with plastisol, the poly majority will migrate on darker melange grounds and under heavy ink deposits, so lay a poly-blocking underbase, keep the cure temperature moderate, and use a lighter deposit than you would on a cotton crew. Embroidery suits a left-chest or small design on the 6.2 oz body with a cut-away backing, though the french terry loops mean a stabiliser is worth the step to prevent the needle from catching loops. For vinyl and HTV, press at a controlled temperature and use a firm press so the film beds into the terry surface. Sublimation is partially viable on the lighter melange colours (Gray Melange, Smoke Melange) where the 68% poly content can hold the disperse dye, but darker melange grounds mute the transfer and the 32% cotton fibres will not accept dye, leaving a heathered vintage result rather than a full-saturation print. DTG is not a practical route on this body because the 68% polyester mutes pretreat adhesion and ink vibrancy, routing most detail work to DTF instead. Water-based and discharge inks will not strip the polyester fibres, so discharge is not compatible.

• Brand: LAT Apparel
• Style: 6965LA / 6965 (Harborside Melange French Terry Pullover with Elbow Patches)
• Fabric: 68% polyester / 32% combed ring-spun cotton Harborside Melange French terry
• Weight: 6.2 oz/yd2
• Construction: Flatlock stitched side seams, self-fabric reverse textured loop collar, cuffs and bottom band, self-fabric textured loop elbow patches, white cotton twill back neck tape, EasyTear label
• Fit: Unisex, true to size crewneck pullover
• Sizes: XS, S, M, L, XL, 2XL, 3XL
• Colors available: 10 melange colours (all heathered melange yarn, no flat solids)
• Ordering: available by the piece or by the case, no minimum order on most colours
• Care: Machine wash cold. Tumble dry low.

The reorder note for the LAT 6965LA: every colour is a melange yarn, so the heathered pattern varies slightly between production runs in the same way any heathered fabric shifts lot to lot. For a matched program across sizes or a reorder, confirm the dye lot or order the full quantity in one run to keep the melange pattern consistent across the set. Pair the 6965LA crew with the LAT 6779 Harborside Melange French Terry Hoodie for a matched crew-and-hood set in the same melange french terry fabric. TheClothingSpace stocks the LAT 6965LA at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.

Building a decorated french terry program or a boutique blank order? Browse all wholesale blank sweatshirts.