Just Hoods By AWDis JHA001 - Unisex 80/20 Midweight College Hoodie - Bottle Green

The Just Hoods by AWDis JHA001 is the College Hoodie, a 280 gsm (8.3 oz) 80% ringspun cotton, 20% polyester midweight pullover that sits apart from a value 50/50 hood on two counts: the cotton-rich 80/20 blend prints far closer to a 100% cotton garment than a poly-heavy fleece, and it ships with a tear-out label so a brand can relabel it as its own blank. That makes it the hoodie a shop reaches for when a streetwear, music, or print-on-demand line wants a soft cotton-rich print face and a rebrandable body rather than the boxy poly feel of a budget fleece, the default for branded merch lines, boutique drops, festival and band hoods, and any program where a near-cotton print and a clean relabelled inside neck are the selling points over the lowest price.

The 80/20 blend is the thing that makes the JHA001 print well, because the cotton-dominant face behaves much more like cotton than a 50/50. For screen printing, the ringspun cotton-rich face holds bold spot colour and fine detail; the 20% polyester migrates far less than a 50/50, so a light poly-blocking underbase on the dark solids and a moderate cure is usually enough, with no heavy poly-block needed. For DTF, the transfer bonds to the fleece face at standard heat-press settings, the most consistent single method across every colour in the line. For DTG, the cotton-rich face pre-treats and prints with near-cotton vibrancy on the solids, which is a genuine advantage over a 50/50 hood; the heathered colours carry more polyester, so dial pre-treat per colour. For water-based and discharge, the 80% cotton solids strip far enough to take a soft, slightly tonal discharge print, better than any 50/50 fleece, while the 20% poly keeps it a touch muted versus a 100% cotton body. For embroidery, the 280 gsm midweight body is a stable base for a left-chest or full-back design with a cut-away backing, kept clear of the pouch pocket and hood seams so it does not pucker. The one caveat is the heathered colours: Heather Grey at 75/25 and Black Smoke at 70/30 behave close to the solids, but Charcoal is a 52/48 that prints like a 50/50, so treat that colour with a full poly-block underbase and a lower cure. Sublimation does not apply, since the cotton-dominant blend is not a polyester sublimation substrate.

• Brand: Just Hoods by AWDis
• Style: JHA001 (Just Hoods by AWDis Unisex College Hoodie)
• Fabric: 80% ringspun cotton / 20% polyester, 280 gsm; Heather Grey 75/25; Black Smoke 70/30; Charcoal 52/48 cotton/polyester
• Weight: 280 gsm (8.3 oz/yd2)
• Construction: Midweight ringspun fleece. Double-fabric hood with self-colour drawcord. Front pouch pocket. Ribbed cuffs and hem. Twin-needle stitching. Tear-out label for rebranding.
• Fit: Unisex regular fit
• Sizes: S, M, L, XL, 2XL, 3XL (extended sizes on select colours)
• Colors available: 40+ colours across solids and heathers (check current availability on the product page)
• Ordering: available by the piece or by the case; confirm current packing per case for your colour and size before a large order
• Care: Machine wash cold. Tumble dry low.

The reorder note specific to this style: the solids run a true 80/20 while Heather Grey is a 75/25, Black Smoke a 70/30, and Charcoal a 52/48, so confirm whether your colour is a solid or a heather before a repeat run, because Charcoal behaves like a 50/50 and needs a heavier underbase than the cotton-rich solids. Pair the JHA001 with a value 50/50 like the Jerzees 996 NuBlend when the budget matters more than the cotton-rich hand, and step up to the Bella + Canvas 3719 sponge fleece when a job wants a premium retail-fit fleece on the same artwork. TheClothingSpace stocks the JHA001 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.

Comparing cotton-rich and value blank hoodies for your decoration method? Browse all wholesale blank hoodies.