Jerzees 29B - Youth DRI-POWER® ACTIVE T-Shirt - Military Green

The Jerzees 29B is the Youth Dri-Power Active T-Shirt, the youth cut of the adult 29M built on the same 5.6 oz 50/50 cotton/polyester jersey with the Dri-Power moisture-management finish. The 50/50 blend is built to move moisture, so the shirt wicks and dries rather than soaking and clinging, and it carries a CPSIA compliant tracking label sewn into the seam, the safety requirement for children's apparel, so it is order-ready for retail, school, and program work. That makes it the youth tee a shop reaches for when a job runs the adult 29M and needs the matching kids sizes on the same artwork, the default for youth team practice and PE shirts, rec-league and camp programs, school spirit and event giveaways spanning adult and youth, and any high-volume run where the cheapest wicking youth 50/50 tee decides the order.

The 29B prints like a value 50/50 tee with the one trap every blend carries: the polyester half wants to migrate under heat. For screen printing, which is the method this tee is built for, the smooth seamless body gives a clean canvas that holds bold spot colour; on dark colours lay a grey poly-blocking underbase and cure at the lowest effective temperature so the dye does not bleed into the ink, and scale the art to the youth chest so a print sized for an adult front does not run off a small body. For DTF, the transfer bonds to the jersey face at standard heat-press settings; on the darker colours use a low-bleed film and a controlled press temperature to keep migration out of the print. For embroidery, the 5.6 oz body takes a small left-chest design with a cut-away backing scaled down to the youth panel. For DTG, the 50/50 blend migrates and prints more muted than a 100% cotton tee, so it is workable on the lighter colours with a blend pre-treat but is not the tee's strength. For vinyl and HTV, solid heat-transfer vinyl holds on the smooth face when pressed at a controlled temperature to limit dye bleed on the darks. Two methods do not apply: water-based discharge needs the dye to strip from 100% cotton, which the 50/50 polyester will not do, leaving only a faded tonal result, and the cotton-dominant blend is not a polyester sublimation substrate.

• Brand: Jerzees
• Style: 29B (Jerzees Youth Dri-Power Active T-Shirt, current manufacturer style 29BR)
• Fabric: 50% cotton, 50% polyester pre-shrunk jersey with Dri-Power moisture management; Ash, Oxford and Vintage Heather colours carry more polyester
• Weight: 5.6 oz/yd2
• Construction: 50/50 pre-shrunk jersey. 1x1 ribbed seamed collar. Shoulder-to-shoulder tape. Seamless body for a wide print area. Double-needle coverstitched front neck. Double-needle hemmed sleeves and bottom. Tear-away label. CPSIA compliant tracking label.
• Fit: Youth classic fit
• Sizes: XS, S, M, L, XL
• Colors available: 40+ colours across solids, ash and oxford heathers, vintage heathers and safety colours (check current availability on the product page)
• Ordering: available by the piece or by the case; confirm current packing per case for your colour and size before a large order
• Care: Machine wash cold. Tumble dry low.

The reorder note specific to this style: the solid colours run a true 50/50 while Ash, Oxford and the Vintage Heather colours carry more polyester, so confirm whether your colour is a solid or a heather before a repeat run, because the poly-rich colours migrate more and need a heavier underbase and a lower cure. Pair the 29B with the adult Jerzees 29M when a program runs the same artwork across youth and adult sizes, and cross-shop the Gildan G500B Youth Heavy Cotton when a job wants a 100% cotton youth body instead of the wicking 50/50. TheClothingSpace stocks the 29B at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.

Building a youth and adult blank tee program? Browse all wholesale blank t-shirts.