Hanes F280 - Ultimate Cotton® 90/10 Full-Zip Hoodie - Charcoal Heather

The Hanes F280 is the Unisex Ultimate Cotton 90/10 Full-Zip Hooded Sweatshirt, a 9.7 oz heavyweight fleece built on Hanes PrintPro XP construction, which lowers pill formation and raises stitch density so screen printing inks and DTF films seat cleanly without the nap pokethrough that plagues basic fleece. The 90/10 US-grown cotton/polyester blend carries a 100% cotton face, so the side of the fabric that takes ink, film and thread behaves like a cotton substrate even though the back carries a 10% polyester content for strength and dimensional stability. The full-zip front uses a covered zipper that runs under a fabric placket, so the zipper teeth sit beneath the surface and do not interrupt a full-front print, which is a practical advantage over hoodies with exposed metal teeth. Construction details include a two-ply jersey-lined hood with a dyed-to-match drawcord, split pouch pockets, and spandex-blend ribbed cuffs and waistband with recovery, in a unisex classic fit from S to 3XL.

The 100% cotton face is the specification that drives the decoration plan on the Hanes F280. DTF is the most straightforward method: the film seats into the cotton face at standard press time and stays consistent across the whole 11-colour card, including the heather grounds, making it the default for one artwork across multiple colour ways. Screen printing suits the F280 well because the cotton face holds ink deposit cleanly. On dark solid grounds (Black, Navy, Deep Royal, Deep Forest, Maroon, Deep Red, Dark Chocolate) run a white underbase and keep cure temperature moderate; the 10% polyester is low enough that dye migration is minimal on the solid cottons, but run the safest low-bleed inks on the solid darks to be safe. Charcoal Heather at 65/35 cotton/poly carries more polyester and needs a stronger poly-block underbase with a lower cure; the same applies to White and Ash on the lighter end where underbase is less critical. The covered zipper and fabric placket mean the full-front print zone is uninterrupted, so centre full-chest art on the front and let the back serve as a second clean canvas for large designs or gang-sheet orders. Embroidery is a strong fit on the dense 9.7 oz fleece: the left-chest location opposite the zip line is the natural hit, and the cotton face reduces pilling around stitching over time. A cut-away backing handles the weight cleanly. Vinyl and HTV bond with a firm press. Water-based and discharge inks work on the cotton-face solids, a capability a 50/50 fleece cannot offer; test Charcoal Heather (65/35) before committing, and do not attempt discharge on Light Steel (85/15) without a wash test. DTG can pretreat the cotton face but the 9.7 oz thick fleece body fights the platen; screen or DTF is the more consistent route on this weight. Sublimation does not apply since the cotton-bearing face will not hold disperse dye at process temperatures.

• Brand: Hanes
• Style: F280 (Ultimate Cotton 90/10 Full-Zip Hooded Sweatshirt)
• Weight: 9.7 oz
• Fabric: solids (Black, Navy, Deep Royal, Deep Forest, Maroon, Deep Red, Dark Chocolate, White) 90/10 US-grown cotton/polyester PrintPro XP fleece, 100% cotton face; Ash approximately 90/10; Light Steel 85/15 cotton/poly; Charcoal Heather 65/35 cotton/poly
• Construction: covered full-length zipper under fabric placket, two-ply jersey-lined hood with dyed-to-match drawcord, split pouch pockets, spandex-blend ribbed cuffs and waistband, double-needle coverseamed armholes and waistband, patented PrintPro XP low-pill high-stitch-density fleece
• Fit: unisex classic fit
• Sizes: S-3XL
• Colors available: Black, Navy, Deep Royal, White, Ash, Light Steel, Charcoal Heather, Maroon, Deep Red, Dark Chocolate, Deep Forest (check current availability on the product page)
• Ordering: available by the piece or by the dozen; case pack quantity varies by colour, confirm current units per case before a large run
• Care: Machine wash cold, inside out. Tumble dry low. Do not iron over decoration.

The reorder note specific to the Hanes F280: the blend shifts between colour groups, with the solid cottons running 90/10, Light Steel at 85/15, and Charcoal Heather at 65/35 cotton/poly. A print recipe that works on a solid dark will need a stronger poly-block and a lower cure on Charcoal Heather because the higher polyester content migrates more readily under heat. The 100% cotton face holds its colour and hand wash after wash better than a 50/50 face, and the PrintPro XP stitch density keeps the print surface consistent across re-orders. TheClothingSpace stocks the Hanes F280 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.

Sourcing hoodies for a team or corporate program? Browse all wholesale hoodies.