Gildan G424L - Women's Performance® Women's Long-Sleeve T-Shirt - Carolina Blue

Same-Day Shipping on Orders Placed by 12 PM EST
White
Save 20%
Starting at
$8.42
Retail Price: $10.58
Colors
Save 13%
Starting at
$9.20
Retail Price: $10.58
FIT women's semi-fitted contoured
Selected Color: Carolina Blue8 colors
Choose Size
$9.20
Out of Stock
$9.20
Out of Stock
$9.20
Out of Stock
$9.20
Out of Stock
$9.20
Out of Stock
$11.05
Out of Stock
Size
Color

Description

The Gildan G424L is a 5.0 oz 100% polyester women's performance long-sleeve tee built for sublimation programs, athletic decoration runs, and team uniform orders where moisture management is a spec requirement. The AquaFX wicking system pulls moisture away from the skin and the FreshCare antimicrobial treatment inhibits bacterial growth, making it the practical blank for activewear, school sports, and staff uniform programs where the garment is worn in motion.

For sublimation, the G424L is one of the more accessible entry points in Gildan's performance line. The 100% polyester construction accepts disperse dyes fully across the entire color range, producing vivid all-over or panel prints with sharp edge definition. White and light colors yield the most saturated sublimation results; sublimating onto coloured polyester blanks tints the finished print, so white is the standard substrate for full-color artwork. For DTF heat transfers, polyester bonds reliably with DTF adhesives and the smooth jersey surface provides consistent film adhesion. Press at standard polyester settings (typically 300-310 F) and check film flexibility after pressing, as stiffer films can crack on stretch-knit bodies. For screen printing on colored G424L garments, the 100% polyester content creates dye migration risk on red, bright, and dark shades under high-temp plastisol cure cycles. Use a low-bleed poly-blocking ink system and cure at the minimum effective temperature. White G424L has no migration risk and prints cleanly with standard plastisol. Vinyl and HTV bond well to the smooth polyester surface at standard settings; use a polyester-compatible HTV formulation and press with a Teflon cover sheet to protect the moisture-management finish.

  • Brand: Gildan
  • Style: G424L (also listed as Gildan 42400L)
  • Fabric: 100% polyester (Sport Gray: 92% polyester / 8% black polyester)
  • Weight: 5.0 oz/yd2
  • Moisture management: AquaFX wicking, FreshCare antimicrobial treatment
  • Construction: Semi-fitted contoured silhouette. Side seams. Seamed single-needle 1/2" collar. Double-needle sleeve and bottom hems. Snag-resistant no-snag fabric.
  • Fit: Women's semi-fitted contoured
  • Sizes: XS-2XL
  • Colors available: 10 colors (White, Black, Navy, Royal, Red, Forest Green, Carolina Blue, Charcoal, Sport Gray, High Viz Safety Green)
  • Care: Machine wash warm. Tumble dry low. Do not bleach. Do not iron decoration.

The non-commodity angle on the G424L is the sublimation substrate trap: 100% polyester accepts full sublimation on white, but the same garment in any colored variant tints the final print because the base dye competes with the disperse ink. Print shops running event or team programs across a color range should specify white G424L for any artwork with accurate color requirements, and reserve colored variants for single-color heat-press or screen-print jobs where tinting is predictable. The G424L is available by the piece or per case, with case pricing that reduces per-unit cost on team and program orders. TheClothingSpace stocks the G424L at wholesale pricing with bulk discounts that increase with order quantity, among the lowest prices online for this style, with fast US shipping on stocked colors.

Comparing performance blanks for your decoration program? Browse all wholesale long-sleeve t-shirts

Features

  • 100% preshrunk cotton
  • Made with sustainably and fairly grown USA cotton
  • Seamless rib at neck
  • Taped shoulder-to-shoulder
  • Double-needle stitching throughout
  • Tear-away label
  • Quarter-turned to eliminate center crease
  • 7/8" collar
  • Classic fit

Shipping & Returns

All Blank orders of $59 or more are shipped FREE same day via UPS Ground. Blank orders under $59 will qualify for the following shipping options:

  • USPS Blank Apparel Shipping (2-4 Business Days): $4.99
  • UPS Ground (1-2 Business Days): $8.99

Read our Shipping Policy for more information.

Fill out the Blank Apparel Return Form within 30 days of the order date to be eligible for a refund or return.

Note: All blank orders shipped outside of the continental US are not eligible for return, exchange, or refund.

Decoration Method Compatibility

How this blank performs across popular decoration methods.

Method Compatible Notes
Sublimation 100% polyester = full sublimation on white; colored variants tint the finished print because base dye competes with disperse ink. Specify white for accurate full-color artwork.
DTF Transfer Polyester bonds reliably with DTF adhesives; smooth jersey surface gives consistent film adhesion. Press at standard polyester settings (~300-310 F). Use flexible film formulation on stretch-knit body.
Vinyl / HTV Polyester-compatible HTV recommended. Press with a Teflon cover sheet to protect the moisture-management finish. Standard polyester press time and temp.
Screen Print (Plastisol) White only at standard settings. Colored variants carry dye migration risk on red, bright, and dark shades. Use low-bleed poly-blocking ink and cure at minimum effective temp.
Embroidery Lightweight 5.0 oz jersey; use a cutaway or tearaway backing for stable stitch registration. Keep stitch count moderate; the semi-fitted contour can pucker under dense fills.
DTG 100% polyester does not hold water-based pre-treat reliably; route to sublimation (white) or DTF transfer (any color).
Screen Print (Water-based / Discharge) 100% polyester will not discharge; water-based inks require cotton content. Route to sublimation or plastisol with poly-block.

How Does the Gildan G424L Compare?

SpecGildan G424LGildan G420LGildan G424
Starting At$8.42$6.29$9.71
Weight5.0 oz4.7 oz5.0 oz
Yarn / Fabric100% polyester, AquaFX wicking100% polyester, AquaFX wicking100% polyester, AquaFX wicking
FitWomen's semi-fitted contouredWomen's semi-fitted contouredUnisex standard
ConstructionLong-sleeve, snag-resistant performance jerseyShort-sleeve, snag-resistant performance jerseyLong-sleeve, snag-resistant performance jersey
Best ForSublimation, athletic decoration, team long-sleeve programsSame performance program in a short-sleeve silhouetteMatching long-sleeve in unisex sizing for mixed-gender team orders

Fabric Blend by Color Group

Not all colorways share the same fabric composition. Check the blend before ordering for decoration jobs where substrate matters.

Color Group Blend Print Consideration
White 100% polyester Full sublimation substrate. All disperse dye color is accurate. Standard plastisol and DTF settings apply.
Sport Gray (92/8 polyester/black polyester) 92% polyester / 8% black polyester Sublimation tints print with the gray base. Step up poly-block underbase for plastisol screen printing. DTF works at standard polyester settings.
Colored solids (Black, Navy, Red, Royal, Forest Green, Carolina Blue, Charcoal) 100% polyester Sublimation tints print with base color. High migration risk with plastisol under standard cure temps. Use low-bleed poly-block ink and lowest effective cure temp.
High Viz Safety Green 100% polyester, fluorescent dye High dye migration risk under heat. Low-bleed poly-block ink required. Lowest effective cure temp. DTF preferred over screen printing on this colorway.

Frequently Asked Questions

Yes, on white and light colors. The Gildan G424L is 100% polyester, which fully accepts disperse dyes for sublimation. White G424L produces accurate full-color sublimation results. Colored variants tint the finished print because the garment's base dye competes with the disperse ink, so white is the standard substrate for any artwork where color accuracy matters.
The Gildan G424L is 5.0 oz/yd2, made from 100% polyester. Sport Gray is a 92/8 polyester/black polyester blend. All colors include AquaFX moisture-wicking and FreshCare antimicrobial treatment. The construction is a smooth snag-resistant no-snag jersey, not a mesh, which gives it a fabric hand closer to a standard tee than a typical athletic jersey.
Yes, with appropriate ink selection. White G424L can be screen printed with standard plastisol at normal settings. Colored G424L garments carry dye migration risk under plastisol cure temps, especially on red, bright, and dark colors. Use a low-bleed or poly-blocking plastisol underbase and cure at the minimum effective temperature to prevent bleed-through on colored blanks.
Yes. The 100% polyester construction bonds reliably with DTF transfer adhesives, and the smooth jersey surface provides consistent film adhesion across all G424L colors. Press at standard polyester DTF settings (typically 300-310 F). Use a flexible film formulation rated for stretch knits, as stiffer films can crack when the garment is worn and stretched.
The Gildan G424L is available in women's sizes XS through 2XL. The fit is semi-fitted and contoured, cut closer to the body than a unisex blank. If your program requires matching men's and women's silhouettes, the Gildan G424 unisex long-sleeve performance tee uses the same polyester fabric in a standard unisex cut.
Yes. TheClothingSpace stocks the Gildan G424L at wholesale pricing with bulk discounts that increase with order quantity, among the lowest prices online for this style. White starts lower than colored variants. Stocked colors ship fast within the US, which keeps lead times short on team, athletic, and school program orders. Contact us to confirm pricing on multi-dozen or program-volume orders.