Gildan G180 - Unisex Heavy Blend® 50/50 Fleece Crew - Gold

The Gildan G180, listed by Gildan as the 18000 Heavy Blend, is the highest-volume blank crewneck sweatshirt in the US decoration market, an 8 oz 50/50 cotton-polyester fleece with a ribbed collar, cuffs, and waistband and set-in sleeves. It is the crewneck counterpart to the G185 hoodie on the same air-jet MVS spun yarn, and its defining advantage for a decorator is the clean front panel: with no hood, pocket, or zipper, the G180 gives the largest flat, unobstructed print area in the Gildan fleece family, which is why it is the default reach for full-front and oversized prints on event, school, team, and promotional sweatshirt programs.

The composition is the detail that decides your underbase, because the G180 is not one substrate across the colour range. Solid colours are 50/50 cotton-polyester, but Sport Grey and the heather shades are 60/40 polyester/cotton, so they carry more polyester and more dye migration risk than the solids. Poly-block a heather G180 even when the same artwork printed clean on a solid colour. For screen printing, the air-jet MVS face takes plastisol cleanly and the smoother yarn holds detail better than a coarse fleece; the unobstructed front panel sits flatter on the platen than any hooded blank, so registration on multi-colour front prints is easier. On the 50/50 solids run a low-bleed underbase on dark and reactive-dye colours and cure at the lower end of the ink manufacturer's range to control migration, and step the poly-block up on the 60/40 heathers. For DTF, the 50/50 fleece bonds well with transfer adhesives and the polyester content improves adhesion over 100% cotton; the 8 oz weight stays stable through the press cycle, and the flat front takes a large transfer cleanly. For embroidery, the 8 oz fleece is a strong substrate for left-chest, full-front, and back placements with a cut-away backing scaled to the stitch count. DTG is uncommon on heavy 50/50 fleece, so route decoration to screen print, DTF, or embroidery.

• Brand: Gildan
• Style: G180 (also listed as Gildan 18000 Heavy Blend Crewneck Sweatshirt)
• Fabric: 50% cotton / 50% polyester fleece in solid colours; Sport Grey and heather colours are 60% polyester / 40% cotton. Air-jet MVS spun yarn for a smoother print face and reduced pilling
• Weight: 8 oz/yd2 (approx. 271 gsm)
• Construction: Crewneck. Ribbed collar, cuffs, and waistband. Set-in sleeves. Double-needle stitching. Tear-away label.
• Fit: Unisex, standard fit
• Sizes: S-5XL
• Colors available: 30+ colours (check current availability on the product page)
• Ordering: available by the case or by the piece; fleece sweatshirts pack fewer units per case than tees, so confirm current packing for your colour and size before a large mixed-size order
• Care: Machine wash warm. Tumble dry medium. Do not bleach.

Gildan holds consistent sizing and dye lot control across production runs, which is why high-volume shops standardise on the G180 for repeat sweatshirt programs where colour and fit have to match between batches. The reorder note specific to this style: confirm whether your colourway is a solid 50/50 or a 60/40 heather before a repeat run, because the underbase and ink choice differ between the two and the heathers need the heavier poly-block. Pair the G180 crew with the matching G185 hoodie when a program needs both silhouettes on one consistent Heavy Blend fabric and colour set. TheClothingSpace stocks the G180 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.

Comparing blank fleece for your decoration program? Read: Gildan 18500 vs Independent IND4000 vs Champion S700.