Burnside BU8801 - Unisex Heather Performance Jogger Pant - Heather Charcoal

The Burnside BU8801 is a 6 oz 100% polyester performance jogger built on a tech fleece body with an elastic drawcord waistband, faux fly, knee piping, a back pocket, side zipper pockets, and banded hemmed ankle cuffs. The full-polyester construction is the point for a decorator: it is one of the few jogger blanks that takes dye sublimation, so a print shop running heather or tie-dye athletic bottoms can put an all-over or panel sublimation design on the leg instead of being limited to a single hip logo. The side zipper pockets and tech fleece hand make it the go-to athletic bottom for performance team kits, gym and studio programs, and promotional jogger sets where a poly base and zip storage matter more than a cotton hand.

Because the BU8801 is a pant with no chest panel, decoration lands on the hip, the outer thigh, or the lower leg, and the side zipper pockets, knee piping, and faux fly set the boundaries for artwork placement. Sublimation is the standout method and the reason to choose a 100% polyester jogger over a cotton-blend fleece pant: the dye gasses into the polyester fibre for an all-over or leg-panel print with no hand and no cracking, best laid out on the lighter heather grounds where the dye reads cleanest. For DTF, the transfer bonds to the smooth poly face at standard heat-press settings and is the most practical route for a hip logo or a leg-length name and number, pressed firmly and kept clear of the side zipper seam and the knee piping. For embroidery, the 6 oz tech fleece takes a hip or thigh logo hooped over a cut-away backing, though a poly tearaway topping helps keep stitches from sinking into the fleece nap. For vinyl, heat-transfer vinyl presses names and numbers cleanly on the flat thigh panel at a controlled polyester-safe temperature. Screen printing is possible but awkward on a tubular poly leg: it needs a low-bleed poly-blocking underbase to stop dye migration from the heather ground, a reduced cure temperature so the polyester does not scorch, and a leg or sleeve platen to print one leg flat. DTG is not a practical route, since the full-polyester face does not hold pre-treatment and the tubular leg will not lay flat on a DTG platen.

• Brand: Burnside
• Style: BU8801 (also listed as Burnside 8801, Go Anywhere Performance Jogger Pant)
• Fabric: 100% polyester performance tech fleece
• Weight: 6 oz/yd2
• Construction: Elastic waistband with drawcord. Faux fly. Knee piping. Back pocket. Side zipper pockets. Hemmed ankle cuffs.
• Fit: Unisex performance jogger, banded cuff
• Sizes: S-3XL (size availability varies by color)
• Colors available: heather and tie-dye colorways including Black, Heather Gray, Heather Charcoal, Heather Navy, Green Camo, Black Camo, Army Tie Dye, Navy Tie Dye, Black Tie Dye
• Ordering: available by the piece or by the case; confirm current packing per case for your color and size before a large order
• Care: Machine wash cold. Tumble dry low. Do not iron print.

The reorder note specific to this style: the BU8801 is a 100% polyester performance jogger, so it sublimates where a cotton-blend fleece pant cannot, but that same polyester ground means any screen print on a heather color needs a low-bleed poly-blocking underbase and a reduced cure to control dye migration. The heather and tie-dye grounds also carry natural lot-to-lot variation, so confirm the dye lot when matching across a multi-case team order. Pair the BU8801 with a matching 100% polyester performance top to run a sublimated athletic set in one fabric family, or cross-shop a cotton-face fleece jogger when a program wants discharge or DTG instead of sublimation. TheClothingSpace stocks the Burnside BU8801 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colors.

Building a sublimated performance set for your decoration method? Browse all wholesale blank sweatshirts and fleece.