Augusta Sportswear 2785 - Unisex Attain Quarter-Zip Pullover - Graphite

The Augusta Sportswear 2785 is the Attain Quarter-Zip Pullover, a lightweight 100% polyester wicking knit built for athletic programs, coaching staff, team warm-ups and corporate outdoor events where a cotton fleece is too heavy or too hot. At 3.35 oz/yd² this is one of the lightest quarter-zips in the wholesale channel, and the polyester wicking knit pulls moisture off skin fast enough to keep the wearer dry during sideline coaching or pre-game warm-ups. Augusta builds the 2785 with Color Secure technology to block dye migration during heat pressing and True Hue Technology for long-run colour retention through repeated washes. The body runs a unisex athletic fit in S through 5XL with set-in sleeves, a quarter-zip pullover front and a tear-away label. Every colour in the 14-shade card is the same 100% polyester knit with no blend exceptions.

The 100% polyester construction opens the full sublimation path, which is the standout method on the 2785. A sublimation transfer bonds into the polyester fibre and will not crack, peel or fade with washing, and because there is no cotton in the knit the colour saturation is full-spectrum on lighter grounds (White, Silver, Gold). On darker grounds (Black, Navy, Maroon, Dark Green) sublimation will not show, so route those to DTF or screen print with a white underbase. DTF is the primary all-colour method: the film seats cleanly on the smooth wicking face, bonds at standard heat press temperature and works across the full colour card including deep grounds. Screen printing with plastisol holds well on the polyester knit with a lighter ink deposit and a moderate cure temperature since 100% polyester will not absorb heavy ink the way a cotton fleece does. Place full-front artwork clear of the quarter-zip placket, since the centre zip breaks a continuous image. Left-chest opposite the zip and full-back are the cleanest placements. Embroidery is limited on this body: the 3.35 oz knit is thinner than a fleece, so keep stitch counts moderate, use a cut-away backing and avoid large heavy fills that distort the lightweight fabric. Vinyl and HTV bond with a standard press for names, numbers and letters placed off the centre zip. DTG is not practical because the 100% polyester will not hold water-based ink without a specialty pretreat, and even then the result is unreliable compared to sublimation or DTF. Discharge does not apply to polyester.

• Brand: Augusta Sportswear
• Style: 2785 (Unisex Attain Quarter-Zip Pullover)
• Weight: 3.35 oz/yd²
• Fabric: 100% polyester moisture-management wicking knit with Color Secure technology (dye-migration prevention) and True Hue Technology (colour retention)
• Construction: set-in sleeves, quarter-zip pullover front, tear-away label
• Fit: unisex athletic fit
• Sizes: S-5XL
• Colors available: 14 team colours including White, Black, Columbia Blue, Dark Green, Gold, Graphite, Kelly, Maroon, Navy, Orange, Purple, Red, Royal, Silver (check current availability on the product page)
• Ordering: available by the piece or by the case with volume pricing; confirm current case packing for your colour before a large order
• Care: Machine wash cold, tumble dry low. Do not iron decoration.

The reorder note specific to this style: the 2785 runs 100% polyester across every colour with no blend exceptions, so one sublimation or DTF recipe covers the entire card without adjusting underbase or cure. The Color Secure finish means heat-pressed transfers are less likely to trigger dye migration from the polyester ground into a light-coloured print, a problem that plagues many poly knits under the press. That built-in migration guard saves a test run on new colourways. TheClothingSpace stocks the Augusta 2785 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.

Building a team warm-up program? Browse all wholesale quarter-zip jackets.