Anvil 887L - Women's Lightweight Long-Sleeve Hooded T-Shirt - Caribbean Blue / Dark Gray

Same-Day Shipping on Orders Placed by 12 PM EST
White
Save 12%
Starting at
$14.77
Retail Price: $16.84
Colors
Save 9%
Starting at
$15.29
Retail Price: $16.84
FIT women's semi-fitted contoured
Selected Color: Caribbean Blue / Dark Gray10 colors
Choose Size
$15.29
Out of Stock
$15.29
Out of Stock
$15.29
Out of Stock
$15.29
Out of Stock
$17.62
Out of Stock
Size
Color

Description

The Anvil 887L is a 4.3 oz combed ring-spun cotton women's long-sleeve hooded t-shirt, semi-fitted with side seams and an unlined hood with a circular drawcord. It is not a fleece hoodie. The jersey construction makes it the correct blank when a decorated program calls for a hooded silhouette without the weight of an 8 oz fleece, and it is common in women's run/walk event, spirit-wear, and salon or studio programs where the print drives the look rather than a heavy layering garment. OEKO-TEX Standard 100 certification covers the finished fabric.

The most important print decision on the Anvil 887L is the colour-group split, because the substrate changes completely between solids and heathers. Solid colours are 100% combed ring-spun cotton 30 singles, a clean cotton face that takes DTF, screen print plastisol, DTG, water-based, and discharge cleanly on light grounds and with a white underbase on dark grounds. Heather colours, including Heather Green, Heather Purple, Heather Blue, and Heather Dark Gray, are 60% polyester / 40% cotton, a poly-majority blend. Run a low-bleed poly-block underbase on heather colourways and cure at the lower end of the ink manufacturer's range to control dye migration; do not skip the poly-block even on lighter heathers because the 60% poly load will ghost plastisol on a dark heather ground if the underbase is thin. The Neon Yellow drawcord on heather colourways is a fluorescent thread and can distract from embroidered designs in the hood-adjacent area, so plan left-chest or lower-body placements on those combinations. For DTF, the semi-fitted side-seamed construction loads flat on the platen and the 4.3 oz jersey is thin enough to pick up fine detail well. For embroidery, the 4.3 oz weight is at the light end for hooded garments, so use a cut-away stabiliser and keep stitch counts moderate to avoid puckering the side seams. The unlined hood means you can print or embroider the hood interior if the program calls for it, which is not possible on a double-lined fleece hoodie.

  • Brand: Anvil (by Gildan)
  • Style: 887L (also sold as Anvil Ladies Ringspun Long-Sleeve Hooded T-Shirt)
  • Fabric: 4.3 oz/yd2 preshrunk 100% combed ring-spun cotton, 30 singles (solid colours); heather colours are 60% polyester / 40% combed ring-spun cotton
  • Weight: 4.3 oz/yd2 (approx. 146 gsm)
  • Construction: Women's semi-fitted contoured silhouette, side-seamed. Relaxed unlined hood with circular drawcord (contrast colour tape and drawcord on some colourways). Double-needle sleeve and bottom hem. Tear-away label.
  • Certification: OEKO-TEX Standard 100 certified
  • Fit: Women's semi-fitted
  • Sizes: S-2XL
  • Colours available: 10 colours (check current product page for availability by colour)
  • Ordering: Available by the piece or by the case; case packing varies by colour and size, so confirm units per case before a large mixed-size order
  • Care: Machine wash warm. Tumble dry medium. Do not bleach.

The 887L's side-seamed construction holds consistent placement run to run for left-chest, full-front, and lower-body prints. Because it is a jersey hooded tee rather than a fleece, it reorders consistently within the Anvil line; the heather colourways carry a fixed 60/40 poly-cotton blend across production runs, so confirm whether your colourway is a solid cotton or a 60/40 heather before a repeat run if the underbase spec changed between orders. TheClothingSpace stocks the Anvil 887L at wholesale pricing with bulk discounts that increase with case and unit quantities, among the lowest prices online for this style, with fast US shipping on stocked colours.

Comparing hooded blanks for a women's program? Browse wholesale hooded blanks at TheClothingSpace.

Features

  • 100% preshrunk cotton
  • Made with sustainably and fairly grown USA cotton
  • Seamless rib at neck
  • Taped shoulder-to-shoulder
  • Double-needle stitching throughout
  • Tear-away label
  • Quarter-turned to eliminate center crease
  • 7/8" collar
  • Classic fit

Shipping & Returns

All Blank orders of $59 or more are shipped FREE same day via UPS Ground. Blank orders under $59 will qualify for the following shipping options:

  • USPS Blank Apparel Shipping (2-4 Business Days): $4.99
  • UPS Ground (1-2 Business Days): $8.99

Read our Shipping Policy for more information.

Fill out the Blank Apparel Return Form within 30 days of the order date to be eligible for a refund or return.

Note: All blank orders shipped outside of the continental US are not eligible for return, exchange, or refund.

Decoration Method Compatibility

How this blank performs across popular decoration methods.

Method Compatible Notes
DTF Transfer Primary method. Semi-fitted side-seamed jersey loads flat; 4.3 oz picks up fine detail well. On heather colourways (60/40 poly-cotton) DTF bonds reliably at standard transfer temps.
Screen Print (Plastisol) Solid cotton colours: white underbase on dark grounds, cure at manufacturer spec. Heather colours (60/40 poly): low-bleed poly-block underbase is mandatory; reduce cure temp to limit dye migration.
Vinyl / HTV Lightweight jersey handles standard HTV well. Use light flexible HTV and confirm temp/time on heather colourways (60/40 poly) to avoid heat migration.
DTG Solid colours: 100% combed cotton face holds pretreat and delivers clean vibrant prints with white underbase on dark grounds. Heather colours are 60% poly and will mute DTG output; stick to DTF on heathers.
Embroidery Possible at moderate stitch counts with a cut-away stabiliser. The 4.3 oz jersey is lightweight for embroidery, so keep designs to left-chest scale. The unlined hood allows interior embroidery placements.
Screen Print (Water-based / Discharge) Solid cotton colours discharge cleanly. Heather colours are 60% polyester and will not discharge; discharge route only on solid cotton colourways.
Sublimation Solid colours are 100% cotton and will not sublimate. Heather colours are only 60% poly, insufficient for full sublimation colour.

How Does the Anvil 887L Compare to Other Hooded Blanks?

SpecAnvil 887LGildan G185 (18500)Port & Company PC90H
Starting At$15.29$12.25$21.98
Weight4.3 oz8.0 oz9.0 oz
Yarn / Fabric100% combed ring-spun cotton (solids); 60/40 poly-cotton (heathers)50/50 cotton-poly fleece, air-jet MVS50/50 cotton-poly fleece, air-jet yarn
FitWomen's semi-fitted, side-seamedUnisex standardUnisex, jersey-lined hood
ConstructionJersey hooded tee, unlined hoodFleece pullover, double-lined hood, pouch pocketFleece pullover, front pouch pocket
Best ForWomen's lightweight hooded programs, event and studio decorationHigh-volume event and promo hoodies, lowest cost per unitMid-tier retail fleece, embroidery programs

Fabric Blend by Color Group

Not all colorways share the same fabric composition. Check the blend before ordering for decoration jobs where substrate matters.

Color Group Blend Print Consideration
Solid colours (Black, White, Navy, Red, Hot Pink, Caribbean Blue) 100% combed ring-spun cotton Full cotton face: DTG, discharge, water-based, and plastisol all perform well. White underbase on dark grounds. Standard cure temp.
Heather colours (Heather Green, Heather Purple, Heather Blue, Heather Dark Gray) 60% polyester / 40% combed ring-spun cotton Poly-majority blend: mandatory low-bleed poly-block underbase for screen print; reduce cure temp to control dye migration. DTF is the most reliable route on heathers. DTG will mute; route to DTF.

Frequently Asked Questions

Yes, but the method depends on the colour group. Solid Anvil 887L colours are 100% combed ring-spun cotton: plastisol with a white underbase on dark grounds and discharge on light grounds both work cleanly. Heather colours (Heather Green, Heather Purple, Heather Blue, Heather Dark Gray) are 60% polyester / 40% cotton, so run a low-bleed poly-block underbase and reduce cure temp on those. DTF is the most reliable single method across the full colour range.
The Anvil 887L is 4.3 oz/yd2 preshrunk combed ring-spun cotton, 30 singles, with a semi-fitted contoured silhouette and side seams. It has a relaxed unlined hood with a circular drawcord, double-needle sleeve and bottom hem, and a tear-away label. It is OEKO-TEX Standard 100 certified. Sizes run S to 2XL. This is a jersey hooded tee, not a fleece hoodie.
Yes. Solid Anvil 887L colours are 100% combed ring-spun cotton. Heather colours, including Heather Green, Heather Purple, Heather Blue, and Heather Dark Gray, are 60% polyester / 40% cotton, a poly-majority blend. This changes the decoration plan: heathers require a poly-block underbase for screen printing and will not discharge. DTG output is muted on heathers. DTF is the most consistent method across both fabric groups.
Yes. The Anvil 887L has a relaxed unlined hood, unlike fleece hoodies with a double-lined hood. The unlined construction means a print or embroidery placement on the hood interior is physically possible. For embroidery inside the hood, use a cut-away stabiliser and keep the stitch count moderate given the 4.3 oz jersey weight. For printing, DTF is the practical route on the hood panel.
Yes. TheClothingSpace stocks the Anvil 887L at wholesale pricing with bulk discounts that increase with case and unit quantities, among the lowest prices online for this style. It is available by the piece or by the case, and pricing improves as quantities rise. Stocked colours ship fast within the US, which keeps lead times short on event, studio, and promotional programs.