Blank infant apparel is the most regulated category in wholesale decorated garments. Every style intended for children under 12 months falls under the Consumer Product Safety Improvement Act, but infant bodysuits, onesies, and rompers carry additional decoration constraints that youth or adult blanks do not. Snap closures at the bottom of a bodysuit sit in or immediately adjacent to the front print zone, creating raised hardware that requires specific platen geometry and modified press settings to print around safely.

This collection carries wholesale blank infant bodysuits, tees, and rompers from Rabbit Skins and Bella Canvas in sizes Newborn through 24 Months. All styles carry CPSIA tracking labels. All infant blanks are priced among the lowest online with bulk discounts and fast US shipping on stocked colors.

Snap Closures, Micro Platens, and Print Zone Constraints

A standard bodysuit or onesie has three to five snap fasteners along the bottom hem. On an infant garment, that snap line falls between three and five inches below the navel, placing it at the lower edge of any front chest decoration. A standard youth platen, let alone an adult platen, cannot be inserted into an infant bodysuit without catching on the snaps or distorting the garment body under tension.

Screen printing on infant bodysuits requires a micro platen or a dedicated infant bodysuit fixture. These platens are sized to seat inside the garment without stressing the snap hardware and typically have a notch or cutout at the lower edge to clear the snap row. Print area on an infant bodysuit chest is approximately 4 to 6 inches wide by 4 to 5 inches tall on 12M sizing, scaling down from there toward Newborn. Artwork must be built at these final output dimensions: artwork that looks clean at 8 inches wide will be unrecognizable at 4 inches if it contains fine detail, gradients, or small text.

DTF Transfers on Infant Garments: Temperature and Pressure Settings

DTF transfers are a practical alternative to screen printing for low-quantity infant orders where setting up a micro platen run is not economical. However, applying a DTF transfer to an infant bodysuit is not identical to pressing a transfer onto an adult tee. Standard DTF application is typically 300 to 320 degrees Fahrenheit at medium to firm pressure for 10 to 15 seconds. On infant bodysuits, both temperature and pressure must be reduced. The combination of lightweight fabric (most infant bodysuits run 4.5 oz or lighter) and proximity to plastic or metal snap hardware means full DTF settings can scorch the fabric, melt or crack the snap, or delaminate the transfer film from the substrate.

A common starting point for infant DTF application is 280 to 290 degrees Fahrenheit at light pressure for 10 seconds, with a cold peel. Test on a production-representative blank before committing to a full run. Position the transfer so the lower edge falls at least one inch above the top snap to avoid pressing over hardware entirely.

CPSIA Compliance and Ink Safety on Infant Blank Apparel

Infant garments face the strictest CPSIA requirements in the children's apparel category. All wholesale infant blanks from Rabbit Skins and Bella Canvas carry manufacturer-embedded tracking labels that include the brand name, production batch, and country of origin. These labels must remain intact on finished goods. Decorators applying graphics to infant garments and reselling them as finished products should confirm tracking labels are visible on the completed garment before shipment.

Beyond the garment itself, ink selection matters more on infant apparel than on any other blank category. Infants put garments in their mouths. CPSIA-compliant inks are formulated without phthalates, lead, and other restricted substances. Plastisol inks that are CPSIA compliant for use on children's garments should be confirmed with the ink supplier before use on infant runs. Water-based and discharge inks that meet CPSIA standards are a safer default for infant orders where the decorator has flexibility in ink selection.

Key Infant Blank Styles: Rabbit Skins RS4400, RS3322, and Bella Canvas 100B

Rabbit Skins RS4400 Infant Fine Jersey Bodysuit is the category volume leader at 100% combed ring-spun cotton with a lap shoulder opening and three-snap closure. The lap shoulder allows the garment to be pulled on without pushing over the infant's face. Rabbit Skins RS3322 Infant Short Sleeve Tee is a pull-on without snaps, making it the simpler press setup for shops that do not have infant-specific platen equipment. Bella Canvas 100B is the fashion-tier bodysuit at 100% Airlume combed cotton, suited for boutique decorated orders where hand feel matters. For programs that span multiple age groups, browse wholesale toddler t-shirts for sizes 2T through 5T and wholesale youth t-shirts for the full children's range.