{"title":"Top of the World","description":null,"products":[{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-burgundy","title":"Top Of The World TW5506 - Unisex Offroad Cap - Burgundy","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Burgundy","offer_id":52342654435635,"sku":"B012TW030","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/7a63ed8a12eeb2.jpg?v=1756956265"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-freedom","title":"Top Of The World TW5506 - Unisex Offroad Cap - Freedom","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Freedom","offer_id":52342654468403,"sku":"B012TW110","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/5f343f6c065f6e.jpg?v=1756956266"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-lagoon-tie-dye","title":"Top Of The World TW5506 - Unisex Offroad Cap - Lagoon Tie Dye","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Lagoon Tie Dye","offer_id":52342654566707,"sku":"JS1585335","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/52d4116438a8db.jpg?v=1756956267"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-black-tie-dye","title":"Top Of The World TW5506 - Unisex Offroad Cap - Black Tie Dye","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Black Tie Dye","offer_id":52342654665011,"sku":"JS1585332","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/5a6ddafc63f4d1.jpg?v=1756956269"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-grey-aloha","title":"Top Of The World TW5506 - Unisex Offroad Cap - Grey Aloha","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Grey Aloha","offer_id":52342654763315,"sku":"JS1587767","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/abd2de0f67c76a.png?v=1756956270"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-navy","title":"Top Of The World TW5506 - Unisex Offroad Cap - Navy","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Navy","offer_id":52342654828851,"sku":"B012TW540","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/cceb583f9b4700.jpg?v=1756956271"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-kelly","title":"Top Of The World TW5506 - Unisex Offroad Cap - Kelly","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Kelly","offer_id":52342654861619,"sku":"B012TW140","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/861edbde869259.jpg?v=1756956272"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-orange","title":"Top Of The World TW5506 - Unisex Offroad Cap - Orange","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Orange","offer_id":52342654894387,"sku":"B012TW210","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/f97d89716401fa.jpg?v=1756956273"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-chambray-aloha","title":"Top Of The World TW5506 - Unisex Offroad Cap - Chambray Aloha","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Chambray Aloha","offer_id":52342654927155,"sku":"JS1587766","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/82d08d4d3e5094.png?v=1756956274"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-navy-natural","title":"Top Of The World TW5506 - Unisex Offroad Cap - Navy \/ Natural","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Navy \/ Natural","offer_id":52342655058227,"sku":"JS1587771","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/845633887bab7f.png?v=1756956276"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-flagtacular-nat","title":"Top Of The World TW5506 - Unisex Offroad Cap - Flagtacular \/ Nat","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Flagtacular \/ Nat","offer_id":52342655189299,"sku":"JS1587770","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/ada760f6e3edf6.png?v=1756956279"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-black","title":"Top Of The World TW5506 - Unisex Offroad Cap - Black","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Black","offer_id":52342655254835,"sku":"B012TW510","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/921bc10210dc77.jpg?v=1756956280"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-flagtacular","title":"Top Of The World TW5506 - Unisex Offroad Cap - Flagtacular","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Flagtacular","offer_id":52342655320371,"sku":"B012TW090","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/ac2d1a2e523502.jpg?v=1756956282"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-denim","title":"Top Of The World TW5506 - Unisex Offroad Cap - Denim","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Denim","offer_id":52342655353139,"sku":"B012TW080","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/67fe29765db956.jpg?v=1756956284"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-tiff-blue","title":"Top Of The World TW5506 - Unisex Offroad Cap - Tiff Blue","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Tiff Blue","offer_id":52342655451443,"sku":"B012TW260","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/57fd1679ee3755.jpg?v=1756956285"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-olive-tie-dye","title":"Top Of The World TW5506 - Unisex Offroad Cap - Olive Tie Dye","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Olive Tie Dye","offer_id":52342655516979,"sku":"JS1585336","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/6c5cf70be99801.jpg?v=1756956286"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-copper","title":"Top Of The World TW5506 - Unisex Offroad Cap - Copper","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Copper","offer_id":52342655582515,"sku":"B012TW060","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/6e94ea95ce04cd.jpg?v=1756956287"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-forest","title":"Top Of The World TW5506 - Unisex Offroad Cap - Forest","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Forest","offer_id":52342655680819,"sku":"B012TW100","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/ae1e110a12a60f.jpg?v=1756956289"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-purple","title":"Top Of The World TW5506 - Unisex Offroad Cap - Purple","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Purple","offer_id":52342655811891,"sku":"B012TW240","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/0ebbbab23c39e6.jpg?v=1756956290"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-periwinkle-tie-dye","title":"Top Of The World TW5506 - Unisex Offroad Cap - Periwinkle Tie Dye","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Periwinkle Tie Dye","offer_id":52342655844659,"sku":"JS1585337","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/06cacc65fe810c.jpg?v=1756956291"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-black-natural","title":"Top Of The World TW5506 - Unisex Offroad Cap - Black\/Natural","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Black\/Natural","offer_id":52342655942963,"sku":"JS1587769","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/0123873ecb4567.png?v=1756956292"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-grey-tie-dye","title":"Top Of The World TW5506 - Unisex Offroad Cap - Grey Tie Dye","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Grey Tie Dye","offer_id":52342655975731,"sku":"JS1585334","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/0e5ecee6c2f427.jpg?v=1756956293"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-outdoor-camo","title":"Top Of The World TW5506 - Unisex Offroad Cap - Outdoor Camo","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Outdoor Camo","offer_id":52342656041267,"sku":"B012TW220","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/cebd0961ac1da5.jpg?v=1756956294"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-dusty-rose-tie-dye","title":"Top Of The World TW5506 - Unisex Offroad Cap - Dusty Rose Tie Dye","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Dusty Rose Tie Dye","offer_id":52342656074035,"sku":"JS1585333","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/c6ba0a912e514c.jpg?v=1756956296"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-charcoal-natural","title":"Top Of The World TW5506 - Unisex Offroad Cap - Charcoal \/ Natural","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Charcoal \/ Natural","offer_id":52342656106803,"sku":"JS1587765","price":9.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/b7106400abd671.png?v=1756956297"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-black-flagtacular","title":"Top Of The World TW5506 - Unisex Offroad Cap - Black Flagtacular","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Black Flagtacular","offer_id":52342656139571,"sku":"JS1126023","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/6cd447bc81123e.jpg?v=1756956298"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-khaki-flagtaculr","title":"Top Of The World TW5506 - Unisex Offroad Cap - Khaki Flagtaculr","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Khaki Flagtaculr","offer_id":52342656172339,"sku":"JS1126024","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/6eb2b007d752c5.jpg?v=1756956299"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-red","title":"Top Of The World TW5506 - Unisex Offroad Cap - Red","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Red","offer_id":52342656205107,"sku":"B012TW520","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/9255ee19c88aca.jpg?v=1756956301"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-blk-leopard-blk","title":"Top Of The World TW5506 - Unisex Offroad Cap - Blk Leopard\/Blk","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Blk Leopard\/Blk","offer_id":52342656270643,"sku":"JS1587768","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/d3d2b198b1fb2c.png?v=1756956302"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-sunset-tie-dye","title":"Top Of The World TW5506 - Unisex Offroad Cap - Sunset Tie Dye","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Sunset Tie Dye","offer_id":52342656303411,"sku":"JS1585338","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/d6c202a426c9f9.jpg?v=1756956304"},{"product_id":"top-of-the-world-tw5506-unisex-offroad-cap-royal","title":"Top Of The World TW5506 - Unisex Offroad Cap - Royal","description":"\u003cp\u003eThe Top Of The World TW5506 is the Offroad Cap, a vintage-washed cotton twill mesh-back snapback built to an unstructured low-profile crown, the cap a shop reaches for when a programme wants the soft, broken-in casual look rather than the stiff foam-front structured trucker that dominates the ranch and small-brand boom. The line that decides the order is the unstructured washed front: it sits soft and low instead of standing tall and rigid, which makes it the cap for outdoor and adventure brands, festival and resale lines, lifestyle and surf-shop programmes, and any decorator who wants a relaxed washed hand and a wide pattern range over a corporate structured profile. The front panels are a vintage-washed 100% cotton twill, the back panels a 100% polyester soft mesh for breathability, finished with a pre-curved bill and an adjustable snapback closure in one size fits most. The colour card runs 31 ways across solid washed shades, tie-dye effects, aloha prints, camo, leopard and flag patterns.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a cap is a panel-and-structure problem, not a flat-garment one, and the unstructured front changes the playbook. For flat embroidery, the cotton twill front takes a crisp stitched logo, but because the crown is unstructured and low-profile you run a tear-away backing and keep the density moderate so the soft panel does not pucker, and you digitise for a cap and run it on a cap frame clear of the front seam. 3D puff embroidery is the one method to skip here: raised foam puff needs a hard buckram-backed structured front to stand up, and on this soft unstructured crown the foam collapses and distorts, so route a raised look to a structured trucker instead. For a leather or faux-leather patch, the washed cotton front takes the heat-activated adhesive and a tack stitch, the on-trend look that suits the relaxed body. For a woven, PVC or sublimated patch, the same flat front applies. For a heat transfer or cap DTF, press onto the flat twill front only, never the mesh back, and on the tie-dye, aloha and flag fronts use an opaque transfer that carries its own white layer so the art reads over the busy ground. Direct screen printing and DTG do not apply, since you cannot lay a seamed curved cap on a platen, and sublimation does not apply because the decoration front is cotton twill rather than full polyester.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5506 (Adult Offroad Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: Vintage-washed 100% cotton twill front; 100% polyester soft mesh back\u003c\/li\u003e\n  \u003cli\u003eStructure: Unstructured low-profile 6-panel crown\u003c\/li\u003e\n  \u003cli\u003eConstruction: Pre-curved bill, soft mesh back panels, adjustable snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most, adjustable snapback\u003c\/li\u003e\n  \u003cli\u003eColors available: 31 colourways across solid washed shades, tie-dye, aloha, camo, leopard and flag patterns (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colourway before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean or hand wash cold. Air dry to protect the washed finish and shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the unstructured washed crown and the wide pattern card make the TW5506 a fashion and lifestyle cap rather than a corporate structured trucker, so lock the decoration to flat embroidery or a heat-pressed patch and skip 3D puff, and on the patterned fronts pre-test the patch or transfer placement against the busy ground. Cross-shop the Adams AD969 when a programme wants the same soft washed-cotton hand on a full-fabric dad cap without the mesh back, and the Richardson 112 when the job wants a stiff structured foam front for 3D puff at a lower price. TheClothingSpace stocks the TW5506 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colourways.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a headwear programme for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank caps and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Royal","offer_id":52342656368947,"sku":"B012TW530","price":12.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/4e41d46412ea19.jpg?v=1756956304"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-black","title":"Top Of The World TW5510 - Unisex Crew Cap - Black","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Black","offer_id":52342845440307,"sku":"B015TW510","price":10.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/5fbaa2153cc400.jpg?v=1756960551"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-olive-tie-dye","title":"Top Of The World TW5510 - Unisex Crew Cap - Olive Tie dye","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Olive Tie dye","offer_id":52342845473075,"sku":"JS1585343","price":10.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/caff9fccd31362.png?v=1756960553"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-navy","title":"Top Of The World TW5510 - Unisex Crew Cap - Navy","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Navy","offer_id":52342845505843,"sku":"B015TW540","price":10.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/e2b9a4e6f0c81c.jpg?v=1756960554"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-copper","title":"Top Of The World TW5510 - Unisex Crew Cap - Copper","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Copper","offer_id":52342845538611,"sku":"B015TW060","price":10.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/1b2301cce6e786.jpg?v=1756960555"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-gray","title":"Top Of The World TW5510 - Unisex Crew Cap - Gray","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Gray","offer_id":52342845604147,"sku":"B015TW130","price":10.58,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/7560ab76adec02.jpg?v=1756960556"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-royal","title":"Top Of The World TW5510 - Unisex Crew Cap - Royal","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Royal","offer_id":52342845636915,"sku":"B015TW530","price":10.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/13aceb4aeb729c.jpg?v=1756960557"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-white","title":"Top Of The World TW5510 - Unisex Crew Cap - White","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ White","offer_id":52342845669683,"sku":"B015TW000","price":10.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/9fc03aec33b43f.jpg?v=1756960558"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-khaki","title":"Top Of The World TW5510 - Unisex Crew Cap - Khaki","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Khaki","offer_id":52342845702451,"sku":"B015TW150","price":10.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/29b1fa1193c028.png?v=1756960560"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-grey-tie-dye","title":"Top Of The World TW5510 - Unisex Crew Cap - Grey Tie Dye","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Grey Tie Dye","offer_id":52342845735219,"sku":"JS1585341","price":10.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/976e9c7f300390.png?v=1756960561"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-sunset-tie-dye","title":"Top Of The World TW5510 - Unisex Crew Cap - Sunset Tie Dye","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Sunset Tie Dye","offer_id":52342845767987,"sku":"JS1585345","price":10.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/17e623f53f5ce2.png?v=1756960563"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-black-tie-dye","title":"Top Of The World TW5510 - Unisex Crew Cap - Black Tie Dye","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Black Tie Dye","offer_id":52342845800755,"sku":"JS1585339","price":10.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/4636aadf778e8d.png?v=1756960563"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-dusty-rose-tie-dye","title":"Top Of The World TW5510 - Unisex Crew Cap - Dusty Rose Tie Dye","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Dusty Rose Tie Dye","offer_id":52342845866291,"sku":"JS1585340","price":10.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/bf36f280cbae77.png?v=1756960564"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-lagoon-tie-dye","title":"Top Of The World TW5510 - Unisex Crew Cap - Lagoon Tie Dye","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Lagoon Tie Dye","offer_id":52342845899059,"sku":"JS1585342","price":10.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/9981c4a1f4abb1.png?v=1756960565"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-stone","title":"Top Of The World TW5510 - Unisex Crew Cap - Stone","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Stone","offer_id":52342845931827,"sku":"B015TW250","price":10.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/60c7cedfecb4d0.jpg?v=1756960566"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-denim","title":"Top Of The World TW5510 - Unisex Crew Cap - Denim","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Denim","offer_id":52342845964595,"sku":"B015TW080","price":10.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/0d57986e19c680.jpg?v=1756960568"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-periwinkle-tie-dye","title":"Top Of The World TW5510 - Unisex Crew Cap - Periwinkle Tie Dye","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Periwinkle Tie Dye","offer_id":52342845997363,"sku":"JS1585344","price":10.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/f4335168fe64b2.png?v=1756960569"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-forest","title":"Top Of The World TW5510 - Unisex Crew Cap - Forest","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Forest","offer_id":52342846062899,"sku":"B015TW100","price":10.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/a0a9fee6410c49.jpg?v=1756960570"},{"product_id":"top-of-the-world-tw5510-unisex-crew-cap-outdoor-camo","title":"Top Of The World TW5510 - Unisex Crew Cap - Outdoor Camo","description":"\u003cp\u003eThe Top Of The World TW5510 is a 6-panel, unstructured, low-profile crew cap in 100% washed cotton twill, built for decorators running embroidery and transfer programs on a relaxed dad-cap silhouette. The washed twill gives a broken-in, soft hand straight off the press, and the unstructured crown sits low and collapses flat, which makes it an easy hat to hoop and an easy hat to ship in volume. The adjustable self-fabric back closure means one size covers a full roster, so school, team, brewery, and event programs can run a single SKU across every head size instead of stocking fitted runs. Note that the line is transitioning to J America Headwear, and the Outdoor Camo colourway is 100% polyester rather than cotton twill.\u003c\/p\u003e\n\n\u003cp\u003eFor the decorator, the construction drives the method choice. Embroidery is the dominant method on the TW5510, and the unstructured front is the detail to plan for: there is no buckram backing behind the front panels to hold stitches upright, so a structured-cap digitising file will pull and pucker on this crown. Back the front panels with a firmer cutaway or tearaway and reduce stitch density on fills, and the low-profile crown will hold a clean left-front or full-front logo. The standard front embroidery field on a low-profile 6-panel runs about 2.4 inches tall before the design crowds the seams, and the center-front seam limits how wide a single connected design can sit, so split wide wordmarks across panels or keep them inside one panel. Flat and 3D puff embroidery both run here, though puff wants the denser washed twill backed firmly to keep foam edges crisp. Heat-transfer and DTF transfer press cleanly on the flat washed-twill front for full-colour or photographic art that thread cannot reproduce, and a woven or leather patch heat-applied to the front is a strong fit for the broken-in, outdoor look of this cap. Screen printing only applies to flat panel areas, not a curved structured front, so treat it as a niche option here. Sublimation is limited to the white Outdoor Camo polyester body, since cotton twill will not take dye-sub.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5510 (Adult \/ Unisex Crew Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% washed cotton twill; Outdoor Camo colourway is 100% polyester\u003c\/li\u003e\n  \u003cli\u003eConstruction: 6-panel, unstructured, low-profile crown, pre-curved bill\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable self-fabric back closure\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex, one size fits most\u003c\/li\u003e\n  \u003cli\u003eDecoration: Embroidery (flat and 3D puff), heat-transfer \/ DTF transfer, woven or leather patch, screen print on flat panels only, sublimation on white poly camo only\u003c\/li\u003e\n  \u003cli\u003eColours: 18 colourways including solids, washed tones, and tie-dye options (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase quantity: Sold by the piece or by the case; the published units per case vary by colour, so confirm packing before a large mixed-colour order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold, hang or tumble dry low to preserve the washed-twill hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe non-commodity factor on the TW5510 is the unstructured washed-twill front: it reads as a casual, broken-in cap that buyers want for outdoor and lifestyle-adjacent merch, but it needs the right backing and density to decorate cleanly, which is exactly the kind of detail a buyer comparing structured trucker caps will miss. If your program needs a stiffer front that holds a tall logo without backing, price a structured 6-panel alongside it before committing. TheClothingSpace stocks the TW5510 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a cap for your decoration method? \u003ca href=\"\/collections\/hats\"\u003eBrowse the full wholesale headwear collection\u003c\/a\u003e to compare structured and unstructured caps.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Outdoor Camo","offer_id":52342846095667,"sku":"B015TW220","price":10.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/2d634424f95340.jpg?v=1756960571"},{"product_id":"top-of-the-world-tw5505-unisex-ranger-cap-red-white-navy","title":"Top Of The World TW5505 - Unisex Ranger Cap - Red\/ White\/ Navy","description":"\u003cp\u003eThe Top Of The World TW5505 Ranger Cap is a 6-panel, structured, mid-profile snapback built in 100% polyester, which makes it a decorator workhorse for embroidered logo programs, team and league orders, and promotional headwear runs where the firm front panel has to hold a clean stitch. The structured buckram-backed crown stands up on its own and gives a stable, upright field for a left-front or full-front logo, so the design does not collapse the way it can on a soft, unstructured cap. The pre-curved visor and adjustable plastic snapback keep sizing simple across a mixed order: one size covers most adult heads, which removes the size-grid guesswork that comes with fitted caps. Contrast stitching on the visor and side panels gives the blank a finished look before a single stitch of decoration goes on.\u003c\/p\u003e\n\n\u003cp\u003eFor decoration, embroidery is the primary method and the reason most shops reach for the TW5505. The structured front panel and buckram backing support flat and 3D puff embroidery without the brim distortion you fight on unstructured blanks, and the cap mounts cleanly on a standard curved-front cap frame for hooping. Plan your digitizing around the front field of roughly 2.4 inches of usable height between the visor seam and the crown top, and keep dense fills clear of the center seam, which can split wide artwork. For heat-applied work, the polyester shell takes heat-transfer vinyl and DTF transfers well on the structured front using a curved cap press or a hat clam; watch dwell time and temperature, because polyester scorches faster than cotton. A woven or leather patch (heat-seal or sewn) is a strong fit on the flat-faced front panel and sidesteps the seam and curvature limits that constrain stitched and printed art. Screen printing is viable only on the flat visor or a foam-front variant, not the curved structured crown. Sublimation works only on white polyester panels because the dye needs a light poly substrate to develop, so it is limited to white colorways. There is no DTG or discharge path on this cap; the polyester shell rules both out.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Top Of The World (headwear transitioning to J America Headwear)\u003c\/li\u003e\n  \u003cli\u003eStyle: TW5505 (Adult \/ Unisex Ranger Cap)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% polyester\u003c\/li\u003e\n  \u003cli\u003eCrown: 6-panel, structured, mid-profile, buckram-backed front\u003c\/li\u003e\n  \u003cli\u003eVisor: pre-curved\u003c\/li\u003e\n  \u003cli\u003eClosure: adjustable plastic snapback\u003c\/li\u003e\n  \u003cli\u003eSizing: one size fits most (adult)\u003c\/li\u003e\n  \u003cli\u003eDetailing: contrast stitching on visor and side panels\u003c\/li\u003e\n  \u003cli\u003eDecoration: embroidery (flat and 3D puff), heat transfer \/ DTF, woven or leather patch, screen print (flat visor \/ foam-front only), sublimation (white poly only)\u003c\/li\u003e\n  \u003cli\u003eColorways: 17+ including solids and contrast and neon combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCase packing: caps order by the dozen, with full case packs that deepen the bulk discount; confirm current per-case quantity before a large order\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOne sourcing note for decorators: the TW5505 is the structured, mid-profile member of the Top Of The World cap line. If a job calls for a softer, low-profile, unstructured look, the cotton-twill Top Of The World TW5510 Crew Cap is the sibling to price instead; the two are not interchangeable on press because a structured crown and an unstructured crown behave differently under a hoop. TheClothingSpace stocks the TW5505 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colorways.\u003c\/p\u003e\n\n\u003cp\u003eChoosing a blank cap for an embroidery program? \u003ca href=\"\/collections\/hats\"\u003eBrowse the wholesale blank hats and headwear collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Top Of The World","offers":[{"title":"One Size \/ Red\/ White\/ Navy","offer_id":52343046406451,"sku":"JS1587759","price":12.23,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/d5feea25a9fe2d.png?v=1756962409"}],"url":"https:\/\/www.theclothingspace.com\/collections\/top-of-the-world.oembed?page=2","provider":"ClothingSpace","version":"1.0","type":"link"}