{"title":"Port Authority","description":null,"products":[{"product_id":"port-authority-c112-snapback-trucker-cap-txorg-wht","title":"Port Authority C112 - Snapback Trucker Cap - TxOrg\/Wht","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ TxOrg\/Wht","offer_id":52339747651891,"sku":"JS1590287","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/82f4ceb3e9204a.jpg?v=1756900810"},{"product_id":"port-authority-c112-snapback-trucker-cap-black-tan","title":"Port Authority C112 - Snapback Trucker Cap - Black\/Tan","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Black\/Tan","offer_id":52339747684659,"sku":"JS1437998","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/1ee28ffe7cf14f.png?v=1756900812"},{"product_id":"port-authority-c112-snapback-trucker-cap-rich-navy-white","title":"Port Authority C112 - Snapback Trucker Cap - Rich Navy \/ White","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Rich Navy \/ White","offer_id":52339747717427,"sku":"JS704164","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/79740ff3ac87fd.jpg?v=1756900814"},{"product_id":"port-authority-c112-snapback-trucker-cap-black","title":"Port Authority C112 - Snapback Trucker Cap - Black","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Black","offer_id":52339747782963,"sku":"JS704138","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/8f69f17c34e9d4.jpg?v=1756900815"},{"product_id":"port-authority-c112-snapback-trucker-cap-gystl-trnv","title":"Port Authority C112 - Snapback Trucker Cap - GyStl\/TrNv","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ GyStl\/TrNv","offer_id":52339747815731,"sku":"JS1592047","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/2695eba252edb7.jpg?v=1756900817"},{"product_id":"port-authority-c112-snapback-trucker-cap-heather-gray-ri-navy","title":"Port Authority C112 - Snapback Trucker Cap - Heather Gray \/ Ri Navy","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Heather Gray \/ Ri Navy","offer_id":52339747848499,"sku":"JS704157","price":6.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/b1b1be3638f159.jpg?v=1756900819"},{"product_id":"port-authority-c112-snapback-trucker-cap-heather-gray-pa-blue","title":"Port Authority C112 - Snapback Trucker Cap - Heather Gray \/ Pa Blue","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Heather Gray \/ Pa Blue","offer_id":52339748274483,"sku":"JS704156","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/3fd7dd101c112d.jpg?v=1756900821"},{"product_id":"port-authority-c112-snapback-trucker-cap-dark-green-white","title":"Port Authority C112 - Snapback Trucker Cap - Dark Green \/ White","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Dark Green \/ White","offer_id":52339748307251,"sku":"JS704143","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/9e73efd93013b7.jpg?v=1756900823"},{"product_id":"port-authority-c112-snapback-trucker-cap-gystl-blk","title":"Port Authority C112 - Snapback Trucker Cap - GyStl\/Blk","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ GyStl\/Blk","offer_id":52339748471091,"sku":"JS1590754","price":6.02,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/27e78c50d665f9.png?v=1756900824"},{"product_id":"port-authority-c112-snapback-trucker-cap-true-navy","title":"Port Authority C112 - Snapback Trucker Cap - True Navy","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ True Navy","offer_id":52339748503859,"sku":"JS704167","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/36e306c266c1ae.png?v=1756900826"},{"product_id":"port-authority-c112-snapback-trucker-cap-gray-steel-nyl","title":"Port Authority C112 - Snapback Trucker Cap - Gray Steel \/ Nyl","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Gray Steel \/ Nyl","offer_id":52339748536627,"sku":"JS704151","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/a653b1ac72fbf0.jpg?v=1756900827"},{"product_id":"port-authority-c112-snapback-trucker-cap-heather-gray-black","title":"Port Authority C112 - Snapback Trucker Cap - Heather Gray \/ Black","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Heather Gray \/ Black","offer_id":52339748569395,"sku":"JS704155","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/4290dd4b77b133.jpg?v=1756900829"},{"product_id":"port-authority-c112-snapback-trucker-cap-orng-white","title":"Port Authority C112 - Snapback Trucker Cap - Orng\/White","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Orng\/White","offer_id":52339748864307,"sku":"JS1591330","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/08de074661edb3.jpg?v=1756900831"},{"product_id":"port-authority-c112-snapback-trucker-cap-pat-blue-french-red-white","title":"Port Authority C112 - Snapback Trucker Cap - Pat Blue \/ French Red \/ White","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Pat Blue \/ French Red \/ White","offer_id":52339748962611,"sku":"JS704161","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/c86f432c5f30f7.jpg?v=1756900832"},{"product_id":"port-authority-c112-snapback-trucker-cap-gray-steel-purple","title":"Port Authority C112 - Snapback Trucker Cap - Gray Steel \/ Purple","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Gray Steel \/ Purple","offer_id":52339749028147,"sku":"JS704152","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/275372a5c87eaf.jpg?v=1756900834"},{"product_id":"port-authority-c112-snapback-trucker-cap-ovdrbgn-bk","title":"Port Authority C112 - Snapback Trucker Cap - OvDrbGn\/Bk","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ OvDrbGn\/Bk","offer_id":52339749093683,"sku":"JS1593184","price":6.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/fff7b48333c6af.jpg?v=1756900836"},{"product_id":"port-authority-c112-snapback-trucker-cap-flame-red-white","title":"Port Authority C112 - Snapback Trucker Cap - Flame Red \/ White","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Flame Red \/ White","offer_id":52339749912883,"sku":"JS704146","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/e93f436588d976.jpg?v=1756900837"},{"product_id":"port-authority-c112-snapback-trucker-cap-gray-steel","title":"Port Authority C112 - Snapback Trucker Cap - Gray Steel","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Gray Steel","offer_id":52339749945651,"sku":"JS704147","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/56464ad2d1bbf1.jpg?v=1756900838"},{"product_id":"port-authority-c112-snapback-trucker-cap-gray-steel-nbl","title":"Port Authority C112 - Snapback Trucker Cap - Gray Steel \/ Nbl","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Gray Steel \/ Nbl","offer_id":52339749978419,"sku":"JS704148","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/5129c113622f1b.jpg?v=1756900840"},{"product_id":"port-authority-c112-snapback-trucker-cap-true-red","title":"Port Authority C112 - Snapback Trucker Cap - True Red","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ True Red","offer_id":52339750043955,"sku":"JS704168","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/627befd4ef8f6e.jpg?v=1756900841"},{"product_id":"port-authority-c112-snapback-trucker-cap-gray-steel-npk","title":"Port Authority C112 - Snapback Trucker Cap - Gray Steel \/ Npk","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Gray Steel \/ Npk","offer_id":52339750764851,"sku":"JS704150","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/bf2750c11aadab.jpg?v=1756900843"},{"product_id":"port-authority-c112-snapback-trucker-cap-flame-red-black","title":"Port Authority C112 - Snapback Trucker Cap - Flame Red \/ Black","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Flame Red \/ Black","offer_id":52339750797619,"sku":"JS704145","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/1bd50dee3e24d5.jpg?v=1756900845"},{"product_id":"port-authority-c112-snapback-trucker-cap-coyote-brown","title":"Port Authority C112 - Snapback Trucker Cap - Coyote Brown","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Coyote Brown","offer_id":52339750830387,"sku":"JS704142","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/b0eddfb437c5d5.png?v=1756900846"},{"product_id":"port-authority-c112-snapback-trucker-cap-heather-gray-white","title":"Port Authority C112 - Snapback Trucker Cap - Heather Gray \/ White","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Heather Gray \/ White","offer_id":52339750863155,"sku":"JS704158","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/fec419a81adb5b.jpg?v=1756900848"},{"product_id":"port-authority-c112-snapback-trucker-cap-black-gray-steel","title":"Port Authority C112 - Snapback Trucker Cap - Black \/ Gray Steel","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Black \/ Gray Steel","offer_id":52339750928691,"sku":"JS704140","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/8fea2a50295305.jpg?v=1756900850"},{"product_id":"port-authority-c112-snapback-trucker-cap-gray-steel-white","title":"Port Authority C112 - Snapback Trucker Cap - Gray Steel \/ White","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Gray Steel \/ White","offer_id":52339750961459,"sku":"JS704153","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/87151626d42461.jpg?v=1756900850"},{"product_id":"port-authority-c112-snapback-trucker-cap-pat-blue","title":"Port Authority C112 - Snapback Trucker Cap - Pat Blue","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Pat Blue","offer_id":52339750994227,"sku":"JS704160","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/b8fdc2e7776858.jpg?v=1756900852"},{"product_id":"port-authority-c112-snapback-trucker-cap-gray-steel-nor","title":"Port Authority C112 - Snapback Trucker Cap - Gray Steel \/ Nor","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Gray Steel \/ Nor","offer_id":52339751026995,"sku":"JS704149","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/40ec46f90e8361.jpg?v=1756900854"},{"product_id":"port-authority-c112-snapback-trucker-cap-rich-navy-h-gray-w","title":"Port Authority C112 - Snapback Trucker Cap - Rich Navy \/ H Gray \/ W","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Rich Navy \/ H Gray \/ W","offer_id":52339752042803,"sku":"JS704165","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/126872402c58b8.jpg?v=1756900855"},{"product_id":"port-authority-c112-snapback-trucker-cap-patriot-blue-white","title":"Port Authority C112 - Snapback Trucker Cap - Patriot Blue \/ White","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Patriot Blue \/ White","offer_id":52339752370483,"sku":"JS704162","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/458b60dc2ece4a.jpg?v=1756900857"},{"product_id":"port-authority-c112-snapback-trucker-cap-gust-gray-black-gys","title":"Port Authority C112 - Snapback Trucker Cap - Gust Gray \/ Black \/ Gys","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Gust Gray \/ Black \/ Gys","offer_id":52339752403251,"sku":"JS704154","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/cd9957895b6a65.jpg?v=1756900859"},{"product_id":"port-authority-c112-snapback-trucker-cap-flame-red","title":"Port Authority C112 - Snapback Trucker Cap - Flame Red","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Flame Red","offer_id":52339752436019,"sku":"JS704144","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/4ff4b144e6a0b0.jpg?v=1756900860"},{"product_id":"port-authority-c112-snapback-trucker-cap-black-white","title":"Port Authority C112 - Snapback Trucker Cap - Black \/ White","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Black \/ White","offer_id":52339752468787,"sku":"JS704141","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/3583c1803473d2.jpg?v=1756900861"},{"product_id":"port-authority-c112-snapback-trucker-cap-olive-drab-green","title":"Port Authority C112 - Snapback Trucker Cap - Olive Drab Green","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Olive Drab Green","offer_id":52339752501555,"sku":"JS704159","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/6f8611c838f4f7.jpg?v=1756900863"},{"product_id":"port-authority-c112-snapback-trucker-cap-carbl-wht","title":"Port Authority C112 - Snapback Trucker Cap - CarBl\/Wht","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ CarBl\/Wht","offer_id":52339752534323,"sku":"JS1591329","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/71aedcb0e7c186.png?v=1756900864"},{"product_id":"port-authority-c112-snapback-trucker-cap-true-khaki-cof","title":"Port Authority C112 - Snapback Trucker Cap - True Khaki \/ Cof","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ True Khaki \/ Cof","offer_id":52339752567091,"sku":"JS704166","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/53cc6fa1a6e9b1.jpg?v=1756900866"},{"product_id":"port-authority-c112-snapback-trucker-cap-wdlnd-camo-black","title":"Port Authority C112 - Snapback Trucker Cap - Wdlnd Camo \/ Black","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Wdlnd Camo \/ Black","offer_id":52339752599859,"sku":"JS704169","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/2d62f869b6518c.jpg?v=1756900868"},{"product_id":"port-authority-c112-snapback-trucker-cap-woodland-brown","title":"Port Authority C112 - Snapback Trucker Cap - Woodland Brown","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Woodland Brown","offer_id":52339752632627,"sku":"JS704171","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/0d6f26b2df58a4.jpg?v=1756900869"},{"product_id":"port-authority-c112-snapback-trucker-cap-black-gold","title":"Port Authority C112 - Snapback Trucker Cap - Black \/ Gold","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Black \/ Gold","offer_id":52339752698163,"sku":"JS704139","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/594506364bad4a.jpg?v=1756900871"},{"product_id":"port-authority-c112-snapback-trucker-cap-white","title":"Port Authority C112 - Snapback Trucker Cap - White","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ White","offer_id":52339752730931,"sku":"JS704170","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/36b380a6a201e7.jpg?v=1756900873"},{"product_id":"port-authority-c112-snapback-trucker-cap-gustygrey","title":"Port Authority C112 - Snapback Trucker Cap - Gustygrey","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Gustygrey","offer_id":52339752763699,"sku":"JS1128566","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/47df86f9528e71.png?v=1756900874"},{"product_id":"port-authority-c112-snapback-trucker-cap-rich-navy","title":"Port Authority C112 - Snapback Trucker Cap - Rich Navy","description":"\u003cp\u003eThe Port Authority C112 is the Snapback Trucker Cap, the SanMar value answer to the benchmark Richardson 112 in the same structured mid-profile silhouette at a lower unit cost. It runs a structured six-panel crown with a 100% cotton twill front and bill on the solid colours (65\/35 poly\/cotton on the heathers), a 100% polyester mesh mid and back, contrast stitching on the bill, and a 7-position snapback, so it holds a logo flat and upright the way a structured cap should while landing well under a premium trucker. That makes it the cap a shop reaches for when a program wants the classic trucker shape on a tight unit budget, the default for leather-patch hat brands, event and team caps, fundraiser and uniform headwear, and any high-volume custom cap run where the recognised structured trucker look and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the C112 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the structured front gives a firm, stable foundation, and the 100% cotton solid front takes a stitch especially cleanly; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured mid-profile front supports the raised foam look at full crown height. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved bill, and note they bond to the twill front only, not the mesh back. Sublimation does not take on the front: the solids run a 100% cotton front and the heathers a cotton-rich 65\/35, so only the 100% polyester mesh back will accept a sublimated dye.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: C112 (Port Authority Snapback Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. 7-position plastic snapback closure. Contrast stitching on the bill.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 100% cotton twill front and bill on solids; 65\/35 polyester\/cotton twill front on heathers\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh mid and back panels\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile (crown height 6 5\/8 inch, front panel width 7 1\/4 inch, bill 2 3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable 7-position plastic snapback\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid and two-tone colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm whether your colour is a solid or a heather before a repeat run, because the solids run a 100% cotton front while the heathers run a 65\/35 poly\/cotton front, and the two-tone combinations split the front, mesh, and visor colours in ways that look similar in a thumbnail. Pair the C112 with the premium Richardson 112 when a program wants the benchmark trucker on the same artwork, and cross-shop the Yupoong 6606 retro trucker when a job wants a curved-bill alternative. TheClothingSpace stocks the C112 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"One Size \/ Rich Navy","offer_id":52339753582899,"sku":"JS704163","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/ee0334d7fbb542.jpg?v=1756900875"},{"product_id":"port-authority-k540-unisex-silk-touch-performance-polo-carolina-blue","title":"Port Authority K540 - Unisex Silk Touch Performance Polo - Carolina Blue","description":"\u003cp\u003eThe Port Authority K540 is the Silk Touch Performance Polo, a 4 oz 100% polyester double-knit with PosiCharge technology that runs as the moisture-wicking version of the cotton-blend K500 on the same colour card. The 100% polyester PosiCharge body is the point: it wicks moisture off the skin and dries fast, resists snags through repeat wear, and the PosiCharge finish holds its colour through industrial wash so a uniform polo stays sharp shift after shift, while the silky double-knit face keeps a soft hand against the skin. That makes it the polo a shop reaches for when a program wants a low-maintenance embroidered performance body, the default for golf and athletic teams, active uniform and hospitality programs, outdoor staff and event wear, and any run where moisture-wicking and colour retention decide the order over a heavier cotton-blend pique that holds sweat.\u003c\/p\u003e\n\n\u003cp\u003eThe K540 is built for embroidery first, but the 100% polyester body changes the print rules versus the cotton-blend K500. For embroidery, the double-knit takes a left-chest corporate logo cleanly with a cut-away backing, the primary and most consistent method on this polo, keep the stitch count moderate so the light performance knit does not pucker. For sublimation, the white and light colours are a true polyester substrate, the dye-sub ink bonds into the fibre for a no-hand print, though it will not show on the mid and dark colours since the dye only adds to the base shade, and a name or number sublimates clean on the flat back panel. For screen printing on the flat back panel, lay a grey poly-block underbase and cure at the lowest effective temperature with low-bleed polyester inks, since 100% of the body is polyester and migrates badly without it, and keep the print off the collar, placket and seamed chest. For DTF and heat transfer, a low-bleed transfer bonds to the knit face at a controlled low press temperature, the right method for player names and numbers on a team polo across every colour. For vinyl and HTV, choose a poly-friendly low-temperature heat-transfer vinyl for uniform numbering on the flat back. DTG does not suit this body, since DTG is a cotton process and the textured 100% polyester double-knit will not pre-treat or hold the ink, route flat artwork to sublimation, embroidery or DTF instead. Discharge does not apply, since there is no cotton to strip.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: K540 (Port Authority Silk Touch Performance Polo)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% polyester double knit with PosiCharge technology (White is 4.3 oz for coverage)\u003c\/li\u003e\n  \u003cli\u003eWeight: 4.0 oz\/yd2\u003c\/li\u003e\n  \u003cli\u003eConstruction: Double-knit performance body. Moisture-wicking and snag-resistant. PosiCharge colour retention. Self-fabric collar. 3-button placket with dyed-to-match buttons. Set-in sleeves with open cuffs. Double-needle cuffs and hem. Tag-free label.\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex classic fit\u003c\/li\u003e\n  \u003cli\u003eSizes: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL\u003c\/li\u003e\n  \u003cli\u003eColors available: 18+ colours across solids (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour and size before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold with like colours. Do not bleach. Tumble dry low. Do not use fabric softener, which coats the wicking finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the PosiCharge 100% polyester body holds colour consistently across lots, which makes it a safe repeat-order body for a uniform program, but confirm your colour reads true between dye batches and note the White runs a heavier 4.3 oz for opacity, and match your embroidery thread or transfer base to the panel, a light or metallic thread and a white DTF base on the dark colours. Pair the K540 with the Port Authority K500 Silk Touch Polo when a program wants a soft 65\/35 poly\/cotton hand on the same colour card, and cross-shop the Team 365 TT51 Zone Performance Polo when a job wants a comparable performance body at a lower unit cost. TheClothingSpace stocks the K540 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a moisture-wicking uniform polo program? \u003ca href=\"\/collections\/polos\"\u003eBrowse all wholesale blank polos\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"3XL \/ Carolina Blue","offer_id":52340291633459,"sku":"JS711296","price":20.96,"currency_code":"USD","in_stock":false},{"title":"2XL \/ Carolina Blue","offer_id":52340291666227,"sku":"JS711295","price":15.18,"currency_code":"USD","in_stock":false},{"title":"L \/ Carolina Blue","offer_id":52340291698995,"sku":"JS711293","price":13.5,"currency_code":"USD","in_stock":false},{"title":"5XL \/ Carolina Blue","offer_id":52340291731763,"sku":"JS711298","price":25.16,"currency_code":"USD","in_stock":false},{"title":"XL \/ Carolina Blue","offer_id":52340291764531,"sku":"JS711294","price":13.5,"currency_code":"USD","in_stock":false},{"title":"S \/ Carolina Blue","offer_id":52340291797299,"sku":"JS711291","price":13.5,"currency_code":"USD","in_stock":false},{"title":"4XL \/ Carolina Blue","offer_id":52340291830067,"sku":"JS711297","price":22.86,"currency_code":"USD","in_stock":false},{"title":"M \/ Carolina Blue","offer_id":52340291862835,"sku":"JS711292","price":13.5,"currency_code":"USD","in_stock":false},{"title":"XS \/ Carolina Blue","offer_id":52340291895603,"sku":"JS711290","price":13.5,"currency_code":"USD","in_stock":false},{"title":"6XL \/ Carolina Blue","offer_id":52340291928371,"sku":"JS711299","price":28.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/5769fa891ed45a.jpg?v=1756904264"},{"product_id":"port-authority-k540-unisex-silk-touch-performance-polo-black","title":"Port Authority K540 - Unisex Silk Touch Performance Polo - Black","description":"\u003cp\u003eThe Port Authority K540 is the Silk Touch Performance Polo, a 4 oz 100% polyester double-knit with PosiCharge technology that runs as the moisture-wicking version of the cotton-blend K500 on the same colour card. The 100% polyester PosiCharge body is the point: it wicks moisture off the skin and dries fast, resists snags through repeat wear, and the PosiCharge finish holds its colour through industrial wash so a uniform polo stays sharp shift after shift, while the silky double-knit face keeps a soft hand against the skin. That makes it the polo a shop reaches for when a program wants a low-maintenance embroidered performance body, the default for golf and athletic teams, active uniform and hospitality programs, outdoor staff and event wear, and any run where moisture-wicking and colour retention decide the order over a heavier cotton-blend pique that holds sweat.\u003c\/p\u003e\n\n\u003cp\u003eThe K540 is built for embroidery first, but the 100% polyester body changes the print rules versus the cotton-blend K500. For embroidery, the double-knit takes a left-chest corporate logo cleanly with a cut-away backing, the primary and most consistent method on this polo, keep the stitch count moderate so the light performance knit does not pucker. For sublimation, the white and light colours are a true polyester substrate, the dye-sub ink bonds into the fibre for a no-hand print, though it will not show on the mid and dark colours since the dye only adds to the base shade, and a name or number sublimates clean on the flat back panel. For screen printing on the flat back panel, lay a grey poly-block underbase and cure at the lowest effective temperature with low-bleed polyester inks, since 100% of the body is polyester and migrates badly without it, and keep the print off the collar, placket and seamed chest. For DTF and heat transfer, a low-bleed transfer bonds to the knit face at a controlled low press temperature, the right method for player names and numbers on a team polo across every colour. For vinyl and HTV, choose a poly-friendly low-temperature heat-transfer vinyl for uniform numbering on the flat back. DTG does not suit this body, since DTG is a cotton process and the textured 100% polyester double-knit will not pre-treat or hold the ink, route flat artwork to sublimation, embroidery or DTF instead. Discharge does not apply, since there is no cotton to strip.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: K540 (Port Authority Silk Touch Performance Polo)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% polyester double knit with PosiCharge technology (White is 4.3 oz for coverage)\u003c\/li\u003e\n  \u003cli\u003eWeight: 4.0 oz\/yd2\u003c\/li\u003e\n  \u003cli\u003eConstruction: Double-knit performance body. Moisture-wicking and snag-resistant. PosiCharge colour retention. Self-fabric collar. 3-button placket with dyed-to-match buttons. Set-in sleeves with open cuffs. Double-needle cuffs and hem. Tag-free label.\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex classic fit\u003c\/li\u003e\n  \u003cli\u003eSizes: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL\u003c\/li\u003e\n  \u003cli\u003eColors available: 18+ colours across solids (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour and size before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold with like colours. Do not bleach. Tumble dry low. Do not use fabric softener, which coats the wicking finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the PosiCharge 100% polyester body holds colour consistently across lots, which makes it a safe repeat-order body for a uniform program, but confirm your colour reads true between dye batches and note the White runs a heavier 4.3 oz for opacity, and match your embroidery thread or transfer base to the panel, a light or metallic thread and a white DTF base on the dark colours. Pair the K540 with the Port Authority K500 Silk Touch Polo when a program wants a soft 65\/35 poly\/cotton hand on the same colour card, and cross-shop the Team 365 TT51 Zone Performance Polo when a job wants a comparable performance body at a lower unit cost. TheClothingSpace stocks the K540 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a moisture-wicking uniform polo program? \u003ca href=\"\/collections\/polos\"\u003eBrowse all wholesale blank polos\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"XL \/ Black","offer_id":52340292059443,"sku":"JS711264","price":13.5,"currency_code":"USD","in_stock":false},{"title":"L \/ Black","offer_id":52340292092211,"sku":"JS711263","price":13.5,"currency_code":"USD","in_stock":false},{"title":"S \/ Black","offer_id":52340292124979,"sku":"JS711261","price":13.5,"currency_code":"USD","in_stock":false},{"title":"6XL \/ Black","offer_id":52340292157747,"sku":"JS711269","price":28.04,"currency_code":"USD","in_stock":false},{"title":"3XL \/ Black","offer_id":52340292190515,"sku":"JS711266","price":20.96,"currency_code":"USD","in_stock":false},{"title":"2XL \/ Black","offer_id":52340292223283,"sku":"JS711265","price":15.18,"currency_code":"USD","in_stock":false},{"title":"5XL \/ Black","offer_id":52340292256051,"sku":"JS711268","price":25.16,"currency_code":"USD","in_stock":false},{"title":"XS \/ Black","offer_id":52340292288819,"sku":"JS711260","price":13.5,"currency_code":"USD","in_stock":false},{"title":"4XL \/ Black","offer_id":52340292321587,"sku":"JS711267","price":22.86,"currency_code":"USD","in_stock":false},{"title":"M \/ Black","offer_id":52340292354355,"sku":"JS711262","price":13.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/2e6c12fc5e7ade.jpg?v=1756904266"},{"product_id":"port-authority-k540-unisex-silk-touch-performance-polo-teal-green","title":"Port Authority K540 - Unisex Silk Touch Performance Polo - Teal Green","description":"\u003cp\u003eThe Port Authority K540 is the Silk Touch Performance Polo, a 4 oz 100% polyester double-knit with PosiCharge technology that runs as the moisture-wicking version of the cotton-blend K500 on the same colour card. The 100% polyester PosiCharge body is the point: it wicks moisture off the skin and dries fast, resists snags through repeat wear, and the PosiCharge finish holds its colour through industrial wash so a uniform polo stays sharp shift after shift, while the silky double-knit face keeps a soft hand against the skin. That makes it the polo a shop reaches for when a program wants a low-maintenance embroidered performance body, the default for golf and athletic teams, active uniform and hospitality programs, outdoor staff and event wear, and any run where moisture-wicking and colour retention decide the order over a heavier cotton-blend pique that holds sweat.\u003c\/p\u003e\n\n\u003cp\u003eThe K540 is built for embroidery first, but the 100% polyester body changes the print rules versus the cotton-blend K500. For embroidery, the double-knit takes a left-chest corporate logo cleanly with a cut-away backing, the primary and most consistent method on this polo, keep the stitch count moderate so the light performance knit does not pucker. For sublimation, the white and light colours are a true polyester substrate, the dye-sub ink bonds into the fibre for a no-hand print, though it will not show on the mid and dark colours since the dye only adds to the base shade, and a name or number sublimates clean on the flat back panel. For screen printing on the flat back panel, lay a grey poly-block underbase and cure at the lowest effective temperature with low-bleed polyester inks, since 100% of the body is polyester and migrates badly without it, and keep the print off the collar, placket and seamed chest. For DTF and heat transfer, a low-bleed transfer bonds to the knit face at a controlled low press temperature, the right method for player names and numbers on a team polo across every colour. For vinyl and HTV, choose a poly-friendly low-temperature heat-transfer vinyl for uniform numbering on the flat back. DTG does not suit this body, since DTG is a cotton process and the textured 100% polyester double-knit will not pre-treat or hold the ink, route flat artwork to sublimation, embroidery or DTF instead. Discharge does not apply, since there is no cotton to strip.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: K540 (Port Authority Silk Touch Performance Polo)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% polyester double knit with PosiCharge technology (White is 4.3 oz for coverage)\u003c\/li\u003e\n  \u003cli\u003eWeight: 4.0 oz\/yd2\u003c\/li\u003e\n  \u003cli\u003eConstruction: Double-knit performance body. Moisture-wicking and snag-resistant. PosiCharge colour retention. Self-fabric collar. 3-button placket with dyed-to-match buttons. Set-in sleeves with open cuffs. Double-needle cuffs and hem. Tag-free label.\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex classic fit\u003c\/li\u003e\n  \u003cli\u003eSizes: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL\u003c\/li\u003e\n  \u003cli\u003eColors available: 18+ colours across solids (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour and size before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold with like colours. Do not bleach. Tumble dry low. Do not use fabric softener, which coats the wicking finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the PosiCharge 100% polyester body holds colour consistently across lots, which makes it a safe repeat-order body for a uniform program, but confirm your colour reads true between dye batches and note the White runs a heavier 4.3 oz for opacity, and match your embroidery thread or transfer base to the panel, a light or metallic thread and a white DTF base on the dark colours. Pair the K540 with the Port Authority K500 Silk Touch Polo when a program wants a soft 65\/35 poly\/cotton hand on the same colour card, and cross-shop the Team 365 TT51 Zone Performance Polo when a job wants a comparable performance body at a lower unit cost. TheClothingSpace stocks the K540 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a moisture-wicking uniform polo program? \u003ca href=\"\/collections\/polos\"\u003eBrowse all wholesale blank polos\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"XS \/ Teal Green","offer_id":52340292485427,"sku":"JS711410","price":13.5,"currency_code":"USD","in_stock":false},{"title":"L \/ Teal Green","offer_id":52340292518195,"sku":"JS711413","price":13.5,"currency_code":"USD","in_stock":false},{"title":"S \/ Teal Green","offer_id":52340292550963,"sku":"JS711411","price":13.5,"currency_code":"USD","in_stock":false},{"title":"XL \/ Teal Green","offer_id":52340292583731,"sku":"JS711414","price":13.5,"currency_code":"USD","in_stock":false},{"title":"2XL \/ Teal Green","offer_id":52340292616499,"sku":"JS711415","price":15.18,"currency_code":"USD","in_stock":false},{"title":"5XL \/ Teal Green","offer_id":52340292649267,"sku":"JS711418","price":25.16,"currency_code":"USD","in_stock":false},{"title":"6XL \/ Teal Green","offer_id":52340292682035,"sku":"JS711419","price":28.04,"currency_code":"USD","in_stock":false},{"title":"3XL \/ Teal Green","offer_id":52340292714803,"sku":"JS711416","price":20.96,"currency_code":"USD","in_stock":false},{"title":"4XL \/ Teal Green","offer_id":52340292747571,"sku":"JS711417","price":22.86,"currency_code":"USD","in_stock":false},{"title":"M \/ Teal Green","offer_id":52340292780339,"sku":"JS711412","price":13.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/57809252ed7cb5.jpg?v=1756904267"},{"product_id":"port-authority-k540-unisex-silk-touch-performance-polo-steel-gray","title":"Port Authority K540 - Unisex Silk Touch Performance Polo - Steel Gray","description":"\u003cp\u003eThe Port Authority K540 is the Silk Touch Performance Polo, a 4 oz 100% polyester double-knit with PosiCharge technology that runs as the moisture-wicking version of the cotton-blend K500 on the same colour card. The 100% polyester PosiCharge body is the point: it wicks moisture off the skin and dries fast, resists snags through repeat wear, and the PosiCharge finish holds its colour through industrial wash so a uniform polo stays sharp shift after shift, while the silky double-knit face keeps a soft hand against the skin. That makes it the polo a shop reaches for when a program wants a low-maintenance embroidered performance body, the default for golf and athletic teams, active uniform and hospitality programs, outdoor staff and event wear, and any run where moisture-wicking and colour retention decide the order over a heavier cotton-blend pique that holds sweat.\u003c\/p\u003e\n\n\u003cp\u003eThe K540 is built for embroidery first, but the 100% polyester body changes the print rules versus the cotton-blend K500. For embroidery, the double-knit takes a left-chest corporate logo cleanly with a cut-away backing, the primary and most consistent method on this polo, keep the stitch count moderate so the light performance knit does not pucker. For sublimation, the white and light colours are a true polyester substrate, the dye-sub ink bonds into the fibre for a no-hand print, though it will not show on the mid and dark colours since the dye only adds to the base shade, and a name or number sublimates clean on the flat back panel. For screen printing on the flat back panel, lay a grey poly-block underbase and cure at the lowest effective temperature with low-bleed polyester inks, since 100% of the body is polyester and migrates badly without it, and keep the print off the collar, placket and seamed chest. For DTF and heat transfer, a low-bleed transfer bonds to the knit face at a controlled low press temperature, the right method for player names and numbers on a team polo across every colour. For vinyl and HTV, choose a poly-friendly low-temperature heat-transfer vinyl for uniform numbering on the flat back. DTG does not suit this body, since DTG is a cotton process and the textured 100% polyester double-knit will not pre-treat or hold the ink, route flat artwork to sublimation, embroidery or DTF instead. Discharge does not apply, since there is no cotton to strip.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: K540 (Port Authority Silk Touch Performance Polo)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% polyester double knit with PosiCharge technology (White is 4.3 oz for coverage)\u003c\/li\u003e\n  \u003cli\u003eWeight: 4.0 oz\/yd2\u003c\/li\u003e\n  \u003cli\u003eConstruction: Double-knit performance body. Moisture-wicking and snag-resistant. PosiCharge colour retention. Self-fabric collar. 3-button placket with dyed-to-match buttons. Set-in sleeves with open cuffs. Double-needle cuffs and hem. Tag-free label.\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex classic fit\u003c\/li\u003e\n  \u003cli\u003eSizes: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL\u003c\/li\u003e\n  \u003cli\u003eColors available: 18+ colours across solids (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour and size before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold with like colours. Do not bleach. Tumble dry low. Do not use fabric softener, which coats the wicking finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the PosiCharge 100% polyester body holds colour consistently across lots, which makes it a safe repeat-order body for a uniform program, but confirm your colour reads true between dye batches and note the White runs a heavier 4.3 oz for opacity, and match your embroidery thread or transfer base to the panel, a light or metallic thread and a white DTF base on the dark colours. Pair the K540 with the Port Authority K500 Silk Touch Polo when a program wants a soft 65\/35 poly\/cotton hand on the same colour card, and cross-shop the Team 365 TT51 Zone Performance Polo when a job wants a comparable performance body at a lower unit cost. TheClothingSpace stocks the K540 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a moisture-wicking uniform polo program? \u003ca href=\"\/collections\/polos\"\u003eBrowse all wholesale blank polos\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"S \/ Steel Gray","offer_id":52340292944179,"sku":"JS711401","price":13.5,"currency_code":"USD","in_stock":false},{"title":"L \/ Steel Gray","offer_id":52340292976947,"sku":"JS711403","price":13.5,"currency_code":"USD","in_stock":false},{"title":"XL \/ Steel Gray","offer_id":52340293009715,"sku":"JS711404","price":13.5,"currency_code":"USD","in_stock":false},{"title":"M \/ Steel Gray","offer_id":52340293042483,"sku":"JS711402","price":13.5,"currency_code":"USD","in_stock":false},{"title":"6XL \/ Steel Gray","offer_id":52340293075251,"sku":"JS711409","price":26.33,"currency_code":"USD","in_stock":false},{"title":"4XL \/ Steel Gray","offer_id":52340293108019,"sku":"JS711407","price":21.49,"currency_code":"USD","in_stock":false},{"title":"XS \/ Steel Gray","offer_id":52340293140787,"sku":"JS711400","price":13.5,"currency_code":"USD","in_stock":false},{"title":"2XL \/ Steel Gray","offer_id":52340293173555,"sku":"JS711405","price":15.18,"currency_code":"USD","in_stock":false},{"title":"5XL \/ Steel Gray","offer_id":52340293206323,"sku":"JS711408","price":27.55,"currency_code":"USD","in_stock":false},{"title":"3XL \/ Steel Gray","offer_id":52340293239091,"sku":"JS711406","price":20.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/fd68ac24f76716.jpg?v=1756904270"},{"product_id":"port-authority-k540-unisex-silk-touch-performance-polo-neon-yellow","title":"Port Authority K540 - Unisex Silk Touch Performance Polo - Neon Yellow","description":"\u003cp\u003eThe Port Authority K540 is the Silk Touch Performance Polo, a 4 oz 100% polyester double-knit with PosiCharge technology that runs as the moisture-wicking version of the cotton-blend K500 on the same colour card. The 100% polyester PosiCharge body is the point: it wicks moisture off the skin and dries fast, resists snags through repeat wear, and the PosiCharge finish holds its colour through industrial wash so a uniform polo stays sharp shift after shift, while the silky double-knit face keeps a soft hand against the skin. That makes it the polo a shop reaches for when a program wants a low-maintenance embroidered performance body, the default for golf and athletic teams, active uniform and hospitality programs, outdoor staff and event wear, and any run where moisture-wicking and colour retention decide the order over a heavier cotton-blend pique that holds sweat.\u003c\/p\u003e\n\n\u003cp\u003eThe K540 is built for embroidery first, but the 100% polyester body changes the print rules versus the cotton-blend K500. For embroidery, the double-knit takes a left-chest corporate logo cleanly with a cut-away backing, the primary and most consistent method on this polo, keep the stitch count moderate so the light performance knit does not pucker. For sublimation, the white and light colours are a true polyester substrate, the dye-sub ink bonds into the fibre for a no-hand print, though it will not show on the mid and dark colours since the dye only adds to the base shade, and a name or number sublimates clean on the flat back panel. For screen printing on the flat back panel, lay a grey poly-block underbase and cure at the lowest effective temperature with low-bleed polyester inks, since 100% of the body is polyester and migrates badly without it, and keep the print off the collar, placket and seamed chest. For DTF and heat transfer, a low-bleed transfer bonds to the knit face at a controlled low press temperature, the right method for player names and numbers on a team polo across every colour. For vinyl and HTV, choose a poly-friendly low-temperature heat-transfer vinyl for uniform numbering on the flat back. DTG does not suit this body, since DTG is a cotton process and the textured 100% polyester double-knit will not pre-treat or hold the ink, route flat artwork to sublimation, embroidery or DTF instead. Discharge does not apply, since there is no cotton to strip.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: K540 (Port Authority Silk Touch Performance Polo)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% polyester double knit with PosiCharge technology (White is 4.3 oz for coverage)\u003c\/li\u003e\n  \u003cli\u003eWeight: 4.0 oz\/yd2\u003c\/li\u003e\n  \u003cli\u003eConstruction: Double-knit performance body. Moisture-wicking and snag-resistant. PosiCharge colour retention. Self-fabric collar. 3-button placket with dyed-to-match buttons. Set-in sleeves with open cuffs. Double-needle cuffs and hem. Tag-free label.\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex classic fit\u003c\/li\u003e\n  \u003cli\u003eSizes: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL\u003c\/li\u003e\n  \u003cli\u003eColors available: 18+ colours across solids (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour and size before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold with like colours. Do not bleach. Tumble dry low. Do not use fabric softener, which coats the wicking finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the PosiCharge 100% polyester body holds colour consistently across lots, which makes it a safe repeat-order body for a uniform program, but confirm your colour reads true between dye batches and note the White runs a heavier 4.3 oz for opacity, and match your embroidery thread or transfer base to the panel, a light or metallic thread and a white DTF base on the dark colours. Pair the K540 with the Port Authority K500 Silk Touch Polo when a program wants a soft 65\/35 poly\/cotton hand on the same colour card, and cross-shop the Team 365 TT51 Zone Performance Polo when a job wants a comparable performance body at a lower unit cost. TheClothingSpace stocks the K540 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a moisture-wicking uniform polo program? \u003ca href=\"\/collections\/polos\"\u003eBrowse all wholesale blank polos\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"XL \/ Neon Yellow","offer_id":52340293468467,"sku":"JS711364","price":13.5,"currency_code":"USD","in_stock":false},{"title":"4XL \/ Neon Yellow","offer_id":52340293501235,"sku":"JS711367","price":22.86,"currency_code":"USD","in_stock":false},{"title":"2XL \/ Neon Yellow","offer_id":52340293534003,"sku":"JS711365","price":15.18,"currency_code":"USD","in_stock":false},{"title":"L \/ Neon Yellow","offer_id":52340293566771,"sku":"JS711363","price":13.5,"currency_code":"USD","in_stock":false},{"title":"XS \/ Neon Yellow","offer_id":52340293599539,"sku":"JS711360","price":13.5,"currency_code":"USD","in_stock":false},{"title":"3XL \/ Neon Yellow","offer_id":52340293632307,"sku":"JS711366","price":20.96,"currency_code":"USD","in_stock":false},{"title":"S \/ Neon Yellow","offer_id":52340293665075,"sku":"JS711361","price":13.5,"currency_code":"USD","in_stock":false},{"title":"5XL \/ Neon Yellow","offer_id":52340293697843,"sku":"JS711368","price":25.16,"currency_code":"USD","in_stock":false},{"title":"6XL \/ Neon Yellow","offer_id":52340293730611,"sku":"JS711369","price":28.04,"currency_code":"USD","in_stock":false},{"title":"M \/ Neon Yellow","offer_id":52340293763379,"sku":"JS711362","price":13.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/dbd9fcc7552e6b.jpg?v=1756904273"},{"product_id":"port-authority-k540-unisex-silk-touch-performance-polo-red","title":"Port Authority K540 - Unisex Silk Touch Performance Polo - Red","description":"\u003cp\u003eThe Port Authority K540 is the Silk Touch Performance Polo, a 4 oz 100% polyester double-knit with PosiCharge technology that runs as the moisture-wicking version of the cotton-blend K500 on the same colour card. The 100% polyester PosiCharge body is the point: it wicks moisture off the skin and dries fast, resists snags through repeat wear, and the PosiCharge finish holds its colour through industrial wash so a uniform polo stays sharp shift after shift, while the silky double-knit face keeps a soft hand against the skin. That makes it the polo a shop reaches for when a program wants a low-maintenance embroidered performance body, the default for golf and athletic teams, active uniform and hospitality programs, outdoor staff and event wear, and any run where moisture-wicking and colour retention decide the order over a heavier cotton-blend pique that holds sweat.\u003c\/p\u003e\n\n\u003cp\u003eThe K540 is built for embroidery first, but the 100% polyester body changes the print rules versus the cotton-blend K500. For embroidery, the double-knit takes a left-chest corporate logo cleanly with a cut-away backing, the primary and most consistent method on this polo, keep the stitch count moderate so the light performance knit does not pucker. For sublimation, the white and light colours are a true polyester substrate, the dye-sub ink bonds into the fibre for a no-hand print, though it will not show on the mid and dark colours since the dye only adds to the base shade, and a name or number sublimates clean on the flat back panel. For screen printing on the flat back panel, lay a grey poly-block underbase and cure at the lowest effective temperature with low-bleed polyester inks, since 100% of the body is polyester and migrates badly without it, and keep the print off the collar, placket and seamed chest. For DTF and heat transfer, a low-bleed transfer bonds to the knit face at a controlled low press temperature, the right method for player names and numbers on a team polo across every colour. For vinyl and HTV, choose a poly-friendly low-temperature heat-transfer vinyl for uniform numbering on the flat back. DTG does not suit this body, since DTG is a cotton process and the textured 100% polyester double-knit will not pre-treat or hold the ink, route flat artwork to sublimation, embroidery or DTF instead. Discharge does not apply, since there is no cotton to strip.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: K540 (Port Authority Silk Touch Performance Polo)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% polyester double knit with PosiCharge technology (White is 4.3 oz for coverage)\u003c\/li\u003e\n  \u003cli\u003eWeight: 4.0 oz\/yd2\u003c\/li\u003e\n  \u003cli\u003eConstruction: Double-knit performance body. Moisture-wicking and snag-resistant. PosiCharge colour retention. Self-fabric collar. 3-button placket with dyed-to-match buttons. Set-in sleeves with open cuffs. Double-needle cuffs and hem. Tag-free label.\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex classic fit\u003c\/li\u003e\n  \u003cli\u003eSizes: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL\u003c\/li\u003e\n  \u003cli\u003eColors available: 18+ colours across solids (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour and size before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold with like colours. Do not bleach. Tumble dry low. Do not use fabric softener, which coats the wicking finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the PosiCharge 100% polyester body holds colour consistently across lots, which makes it a safe repeat-order body for a uniform program, but confirm your colour reads true between dye batches and note the White runs a heavier 4.3 oz for opacity, and match your embroidery thread or transfer base to the panel, a light or metallic thread and a white DTF base on the dark colours. Pair the K540 with the Port Authority K500 Silk Touch Polo when a program wants a soft 65\/35 poly\/cotton hand on the same colour card, and cross-shop the Team 365 TT51 Zone Performance Polo when a job wants a comparable performance body at a lower unit cost. TheClothingSpace stocks the K540 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a moisture-wicking uniform polo program? \u003ca href=\"\/collections\/polos\"\u003eBrowse all wholesale blank polos\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"2XL \/ Red","offer_id":52340293959987,"sku":"JS711385","price":15.18,"currency_code":"USD","in_stock":false},{"title":"XS \/ Red","offer_id":52340293992755,"sku":"JS711380","price":13.5,"currency_code":"USD","in_stock":false},{"title":"XL \/ Red","offer_id":52340294025523,"sku":"JS711384","price":13.5,"currency_code":"USD","in_stock":false},{"title":"M \/ Red","offer_id":52340294058291,"sku":"JS711382","price":13.5,"currency_code":"USD","in_stock":false},{"title":"S \/ Red","offer_id":52340294091059,"sku":"JS711381","price":13.5,"currency_code":"USD","in_stock":false},{"title":"5XL \/ Red","offer_id":52340294123827,"sku":"JS711388","price":25.16,"currency_code":"USD","in_stock":false},{"title":"4XL \/ Red","offer_id":52340294156595,"sku":"JS711387","price":22.86,"currency_code":"USD","in_stock":false},{"title":"L \/ Red","offer_id":52340294189363,"sku":"JS711383","price":13.5,"currency_code":"USD","in_stock":false},{"title":"3XL \/ Red","offer_id":52340294222131,"sku":"JS711386","price":20.96,"currency_code":"USD","in_stock":false},{"title":"6XL \/ Red","offer_id":52340294254899,"sku":"JS711389","price":28.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/cff082a60a7424.jpg?v=1756904276"},{"product_id":"port-authority-k540-unisex-silk-touch-performance-polo-dark-green","title":"Port Authority K540 - Unisex Silk Touch Performance Polo - Dark Green","description":"\u003cp\u003eThe Port Authority K540 is the Silk Touch Performance Polo, a 4 oz 100% polyester double-knit with PosiCharge technology that runs as the moisture-wicking version of the cotton-blend K500 on the same colour card. The 100% polyester PosiCharge body is the point: it wicks moisture off the skin and dries fast, resists snags through repeat wear, and the PosiCharge finish holds its colour through industrial wash so a uniform polo stays sharp shift after shift, while the silky double-knit face keeps a soft hand against the skin. That makes it the polo a shop reaches for when a program wants a low-maintenance embroidered performance body, the default for golf and athletic teams, active uniform and hospitality programs, outdoor staff and event wear, and any run where moisture-wicking and colour retention decide the order over a heavier cotton-blend pique that holds sweat.\u003c\/p\u003e\n\n\u003cp\u003eThe K540 is built for embroidery first, but the 100% polyester body changes the print rules versus the cotton-blend K500. For embroidery, the double-knit takes a left-chest corporate logo cleanly with a cut-away backing, the primary and most consistent method on this polo, keep the stitch count moderate so the light performance knit does not pucker. For sublimation, the white and light colours are a true polyester substrate, the dye-sub ink bonds into the fibre for a no-hand print, though it will not show on the mid and dark colours since the dye only adds to the base shade, and a name or number sublimates clean on the flat back panel. For screen printing on the flat back panel, lay a grey poly-block underbase and cure at the lowest effective temperature with low-bleed polyester inks, since 100% of the body is polyester and migrates badly without it, and keep the print off the collar, placket and seamed chest. For DTF and heat transfer, a low-bleed transfer bonds to the knit face at a controlled low press temperature, the right method for player names and numbers on a team polo across every colour. For vinyl and HTV, choose a poly-friendly low-temperature heat-transfer vinyl for uniform numbering on the flat back. DTG does not suit this body, since DTG is a cotton process and the textured 100% polyester double-knit will not pre-treat or hold the ink, route flat artwork to sublimation, embroidery or DTF instead. Discharge does not apply, since there is no cotton to strip.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: K540 (Port Authority Silk Touch Performance Polo)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% polyester double knit with PosiCharge technology (White is 4.3 oz for coverage)\u003c\/li\u003e\n  \u003cli\u003eWeight: 4.0 oz\/yd2\u003c\/li\u003e\n  \u003cli\u003eConstruction: Double-knit performance body. Moisture-wicking and snag-resistant. PosiCharge colour retention. Self-fabric collar. 3-button placket with dyed-to-match buttons. Set-in sleeves with open cuffs. Double-needle cuffs and hem. Tag-free label.\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex classic fit\u003c\/li\u003e\n  \u003cli\u003eSizes: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL\u003c\/li\u003e\n  \u003cli\u003eColors available: 18+ colours across solids (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour and size before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold with like colours. Do not bleach. Tumble dry low. Do not use fabric softener, which coats the wicking finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the PosiCharge 100% polyester body holds colour consistently across lots, which makes it a safe repeat-order body for a uniform program, but confirm your colour reads true between dye batches and note the White runs a heavier 4.3 oz for opacity, and match your embroidery thread or transfer base to the panel, a light or metallic thread and a white DTF base on the dark colours. Pair the K540 with the Port Authority K500 Silk Touch Polo when a program wants a soft 65\/35 poly\/cotton hand on the same colour card, and cross-shop the Team 365 TT51 Zone Performance Polo when a job wants a comparable performance body at a lower unit cost. TheClothingSpace stocks the K540 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a moisture-wicking uniform polo program? \u003ca href=\"\/collections\/polos\"\u003eBrowse all wholesale blank polos\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"6XL \/ Dark Green","offer_id":52340294517043,"sku":"JS711309","price":28.04,"currency_code":"USD","in_stock":false},{"title":"3XL \/ Dark Green","offer_id":52340294549811,"sku":"JS711306","price":20.96,"currency_code":"USD","in_stock":false},{"title":"5XL \/ Dark Green","offer_id":52340294582579,"sku":"JS711308","price":25.16,"currency_code":"USD","in_stock":false},{"title":"4XL \/ Dark Green","offer_id":52340294615347,"sku":"JS711307","price":22.86,"currency_code":"USD","in_stock":false},{"title":"L \/ Dark Green","offer_id":52340294648115,"sku":"JS711303","price":13.5,"currency_code":"USD","in_stock":false},{"title":"M \/ Dark Green","offer_id":52340294680883,"sku":"JS711302","price":13.5,"currency_code":"USD","in_stock":false},{"title":"2XL \/ Dark Green","offer_id":52340294713651,"sku":"JS711305","price":15.18,"currency_code":"USD","in_stock":false},{"title":"XL \/ Dark Green","offer_id":52340294746419,"sku":"JS711304","price":13.5,"currency_code":"USD","in_stock":false},{"title":"XS \/ Dark Green","offer_id":52340294779187,"sku":"JS711300","price":13.5,"currency_code":"USD","in_stock":false},{"title":"S \/ Dark Green","offer_id":52340294811955,"sku":"JS711301","price":13.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/7d03f10ce5f853.jpg?v=1756904278"},{"product_id":"port-authority-k540-unisex-silk-touch-performance-polo-navy","title":"Port Authority K540 - Unisex Silk Touch Performance Polo - Navy","description":"\u003cp\u003eThe Port Authority K540 is the Silk Touch Performance Polo, a 4 oz 100% polyester double-knit with PosiCharge technology that runs as the moisture-wicking version of the cotton-blend K500 on the same colour card. The 100% polyester PosiCharge body is the point: it wicks moisture off the skin and dries fast, resists snags through repeat wear, and the PosiCharge finish holds its colour through industrial wash so a uniform polo stays sharp shift after shift, while the silky double-knit face keeps a soft hand against the skin. That makes it the polo a shop reaches for when a program wants a low-maintenance embroidered performance body, the default for golf and athletic teams, active uniform and hospitality programs, outdoor staff and event wear, and any run where moisture-wicking and colour retention decide the order over a heavier cotton-blend pique that holds sweat.\u003c\/p\u003e\n\n\u003cp\u003eThe K540 is built for embroidery first, but the 100% polyester body changes the print rules versus the cotton-blend K500. For embroidery, the double-knit takes a left-chest corporate logo cleanly with a cut-away backing, the primary and most consistent method on this polo, keep the stitch count moderate so the light performance knit does not pucker. For sublimation, the white and light colours are a true polyester substrate, the dye-sub ink bonds into the fibre for a no-hand print, though it will not show on the mid and dark colours since the dye only adds to the base shade, and a name or number sublimates clean on the flat back panel. For screen printing on the flat back panel, lay a grey poly-block underbase and cure at the lowest effective temperature with low-bleed polyester inks, since 100% of the body is polyester and migrates badly without it, and keep the print off the collar, placket and seamed chest. For DTF and heat transfer, a low-bleed transfer bonds to the knit face at a controlled low press temperature, the right method for player names and numbers on a team polo across every colour. For vinyl and HTV, choose a poly-friendly low-temperature heat-transfer vinyl for uniform numbering on the flat back. DTG does not suit this body, since DTG is a cotton process and the textured 100% polyester double-knit will not pre-treat or hold the ink, route flat artwork to sublimation, embroidery or DTF instead. Discharge does not apply, since there is no cotton to strip.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Port Authority\u003c\/li\u003e\n  \u003cli\u003eStyle: K540 (Port Authority Silk Touch Performance Polo)\u003c\/li\u003e\n  \u003cli\u003eFabric: 100% polyester double knit with PosiCharge technology (White is 4.3 oz for coverage)\u003c\/li\u003e\n  \u003cli\u003eWeight: 4.0 oz\/yd2\u003c\/li\u003e\n  \u003cli\u003eConstruction: Double-knit performance body. Moisture-wicking and snag-resistant. PosiCharge colour retention. Self-fabric collar. 3-button placket with dyed-to-match buttons. Set-in sleeves with open cuffs. Double-needle cuffs and hem. Tag-free label.\u003c\/li\u003e\n  \u003cli\u003eFit: Unisex classic fit\u003c\/li\u003e\n  \u003cli\u003eSizes: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL\u003c\/li\u003e\n  \u003cli\u003eColors available: 18+ colours across solids (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour and size before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Machine wash cold with like colours. Do not bleach. Tumble dry low. Do not use fabric softener, which coats the wicking finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: the PosiCharge 100% polyester body holds colour consistently across lots, which makes it a safe repeat-order body for a uniform program, but confirm your colour reads true between dye batches and note the White runs a heavier 4.3 oz for opacity, and match your embroidery thread or transfer base to the panel, a light or metallic thread and a white DTF base on the dark colours. Pair the K540 with the Port Authority K500 Silk Touch Polo when a program wants a soft 65\/35 poly\/cotton hand on the same colour card, and cross-shop the Team 365 TT51 Zone Performance Polo when a job wants a comparable performance body at a lower unit cost. TheClothingSpace stocks the K540 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a moisture-wicking uniform polo program? \u003ca href=\"\/collections\/polos\"\u003eBrowse all wholesale blank polos\u003c\/a\u003e.\u003c\/p\u003e","brand":"Port Authority","offers":[{"title":"M \/ Navy","offer_id":52340294975795,"sku":"JS711342","price":13.5,"currency_code":"USD","in_stock":false},{"title":"XS \/ Navy","offer_id":52340295008563,"sku":"JS711340","price":13.5,"currency_code":"USD","in_stock":false},{"title":"2XL \/ Navy","offer_id":52340295041331,"sku":"JS711345","price":15.18,"currency_code":"USD","in_stock":false},{"title":"XL \/ Navy","offer_id":52340295074099,"sku":"JS711344","price":13.5,"currency_code":"USD","in_stock":false},{"title":"5XL \/ Navy","offer_id":52340295106867,"sku":"JS711348","price":25.16,"currency_code":"USD","in_stock":false},{"title":"4XL \/ Navy","offer_id":52340295139635,"sku":"JS711347","price":22.86,"currency_code":"USD","in_stock":false},{"title":"3XL \/ Navy","offer_id":52340295172403,"sku":"JS711346","price":20.96,"currency_code":"USD","in_stock":false},{"title":"6XL \/ Navy","offer_id":52340295205171,"sku":"JS711349","price":28.04,"currency_code":"USD","in_stock":false},{"title":"L \/ Navy","offer_id":52340295237939,"sku":"JS711343","price":13.5,"currency_code":"USD","in_stock":false},{"title":"S \/ Navy","offer_id":52340295270707,"sku":"JS711341","price":13.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/08da1e22ddf202.jpg?v=1756904280"}],"url":"https:\/\/www.theclothingspace.com\/collections\/port-authority.oembed?page=3","provider":"ClothingSpace","version":"1.0","type":"link"}