{"title":"Curved Brim Hats","description":null,"products":[{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-navy","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Navy","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Navy","offer_id":52323393175859,"sku":"B61595650","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/35928_f_fm.jpg?v=1777838102"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-heather-white","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Heather\/ White","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Heather\/ White","offer_id":52323394683187,"sku":"B61595580","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/77758_f_fm.jpg?v=1777837952"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-navy-white","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Navy \/ White","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Navy \/ White","offer_id":52323396157747,"sku":"B61595640","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/35933_f_fm.jpg?v=1777838120"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-royal-white","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Royal \/ White","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Royal \/ White","offer_id":52323397828915,"sku":"B61595760","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/64032_f_fm.jpg?v=1777838251"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-black-white","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Black \/ White","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Black \/ White","offer_id":52323399270707,"sku":"B61595510","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/35931_f_fm.jpg?v=1777837765"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-brown-white","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Brown \/ White","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Brown \/ White","offer_id":52323400745267,"sku":"B61595550","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/66965_f_fm.jpg?v=1777837804"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-red-black","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Red \/ Black","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Red \/ Black","offer_id":52323402187059,"sku":"B61595720","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/68095_f_fm.jpg?v=1777838214"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-charcoal-black","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Charcoal \/ Black","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Charcoal \/ Black","offer_id":52323403563315,"sku":"B61595110","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/77757_f_fm.jpg?v=1777837879"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-white","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - White","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ White","offer_id":52323404939571,"sku":"B61595000","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/35929_f_fm.jpg?v=1777838309"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-heather-black","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Heather\/ Black","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Heather\/ Black","offer_id":52323406151987,"sku":"B61595590","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/77759_f_fm.jpg?v=1777837934"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-multicam-alpine-white","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Multicam Alpine \/ White","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Multicam Alpine \/ White","offer_id":52323407561011,"sku":"B61595540","price":9.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/82460_f_fm.jpg?v=1777837988"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-multicam-arid-brown","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Multicam Arid \/ Brown","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Multicam Arid \/ Brown","offer_id":52323409002803,"sku":"B61595050","price":9.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/82458_f_fm.jpg?v=1777838008"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-multicam-arid-tan","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Multicam Arid \/ Tan","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Multicam Arid \/ Tan","offer_id":52323410346291,"sku":"B61595360","price":9.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/82459_f_fm.jpg?v=1777838026"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-red","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Red","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Red","offer_id":52323411558707,"sku":"B61595710","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/68094_f_fm.jpg?v=1777838196"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-green-camo-black","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Green Camo\/ Black","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Green Camo\/ Black","offer_id":52323412836659,"sku":"B61595970","price":7.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/77806_f_fm.jpg?v=1777837914"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-charcoal","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Charcoal","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Charcoal","offer_id":52323414081843,"sku":"B61595090","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/35927_f_fm.jpg?v=1777837859"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-charcoal-white","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Charcoal \/ White","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Charcoal \/ White","offer_id":52323415294259,"sku":"B61595100","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/70973_f_fm.jpg?v=1777837896"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-silver-black","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Silver \/ Black","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Silver \/ Black","offer_id":52323416539443,"sku":"B61595350","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/64033_f_fm.jpg?v=1777838289"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-multicam-tropic-green","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Multicam Tropic \/ Green","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Multicam Tropic \/ Green","offer_id":52323417981235,"sku":"B61595610","price":9.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/82465_f_fm.jpg?v=1777838083"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-black","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Black","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Black","offer_id":52323419357491,"sku":"B61595500","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/35926_f_fm.jpg?v=1777837746"},{"product_id":"yupoong-6006-unisex-5-panel-flat-bill-trucker-cap-pink","title":"Yupoong 6006 - Unisex 5-Panel Flat Bill Trucker Cap - Pink","description":"\u003cp\u003eThe Yupoong 6006 is a structured 5-panel classic trucker snapback with 65\/35 polyester\/cotton front panels, polyester mesh back, and a flat bill with 8-row stitching. The 6006 is the flat-bill trucker in the Yupoong\/Flexfit family, positioned between the Richardson 112 curved-bill trucker and the Yupoong 6089 classic snapback (which is all fabric, no mesh). The hard buckram front panels give the 6006 a stiff, structured crown that holds 3D puff embroidery cleanly, which is the primary reason decorators choose a structured trucker over an unstructured dad hat.\u003c\/p\u003e\n\n\u003cp\u003eEmbroidery is the primary decoration method on the 6006. The buckram-backed 65\/35 poly\/cotton front panels provide a firm, flat surface that holds flat embroidery and 3D puff embroidery with sharp definition. Standard cap hoops and frames fit the 6006's structured crown without modification. For patch application (woven, leather, PVC), the stiff front panels hold patches with heat seal or sew-on attachment. Leather patches are popular on truckers for retail hat brands. For vinyl\/HTV, the poly\/cotton front holds vinyl at standard cap press settings. For DTF transfers, small transfers can press on the flat front panel at controlled temperature. Screen printing is not standard on trucker caps due to the curved seamed construction, though some shops do flat-panel prints on structured caps with specialized platens.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong (Flexfit family)\u003c\/li\u003e\n  \u003cli\u003eStyle: 6006 (YP Classics Five-Panel Classic Trucker)\u003c\/li\u003e\n  \u003cli\u003eFabric: 65% polyester \/ 35% cotton front panels, polyester mesh back\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured 5-panel. Hard buckram front. Flat bill with 8-row stitching. Matching undervisor. 4-inch crown. Plastic snap closure.\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most (6 5\/8 to 7 5\/8)\u003c\/li\u003e\n  \u003cli\u003eColors available: 21 solid and two-tone colourways (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 6006 competes with the Richardson 112 Adjustable Snapback Trucker and the Flexfit 6511 Trucker Mesh Back in the wholesale trucker cap market. The 6006 at $6.98 is the flat-bill option for programs that want a streetwear-forward trucker profile. The Richardson 112 at $8.48 is the curved-bill trucker that is the highest-volume embroidery cap in the channel. The Flexfit 6511 at $6.60 adds the Flexfit stretch band for a fitted feel. Choose the 6006 when the program wants a flat bill and the classic trucker silhouette. Order by the piece or by the case with no minimum. TheClothingSpace stocks the 6006 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eLooking for trucker caps for your embroidery or hat program? \u003ca href=\"\/collections\/hats\"\u003eBrowse all wholesale blank hats and headwear\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Pink","offer_id":52323420799283,"sku":"B61595300","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/70951_f_fm.jpg?v=1777838160"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-rust-orange-khaki","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Rust Orange \/ Khaki","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Rust Orange \/ Khaki","offer_id":52323475685683,"sku":"B43195320","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/45009_f_fm.jpg?v=1777840589"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-poseidon-black","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Poseidon Black","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Poseidon Black","offer_id":52323475718451,"sku":"B43195400","price":8.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/95382_f_fm.jpg?v=1777840494"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-turquoise-white","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Turquoise \/ White","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Turquoise \/ White","offer_id":52323476111667,"sku":"B43195760","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/82467_f_fm.jpg?v=1777840646"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-red-white","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Red \/ White","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Red \/ White","offer_id":52323476144435,"sku":"B43195710","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/63220_f_fm.jpg?v=1777840552"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-multicam-tropic-green","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Multicam Tropic \/ Green","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Multicam Tropic \/ Green","offer_id":52323476177203,"sku":"B43195840","price":9.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/82488_f_fm.jpg?v=1777840382"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-multicam-arid-brown","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Multicam Arid \/ Brown","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Multicam Arid \/ Brown","offer_id":52323476209971,"sku":"B43195060","price":9.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/82485_f_fm.jpg?v=1777840343"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-steel-blue-silver","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Steel Blue \/ Silver","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Steel Blue \/ Silver","offer_id":52323476242739,"sku":"B43195470","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/84675_f_fm.jpg?v=1777840627"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-dark-heather-grey","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Dark Heather Grey","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Dark Heather Grey","offer_id":52323476275507,"sku":"B43195570","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/97236_f_fm.jpg?v=1777840155"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-charcoal-white","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Charcoal \/ White","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Charcoal \/ White","offer_id":52323476308275,"sku":"B43195110","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/63224_f_fm.jpg?v=1777840101"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-silver","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Silver","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Silver","offer_id":52323476341043,"sku":"B43195430","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/84671_f_fm.jpg?v=1777840609"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-maroon-gray","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Maroon \/ Gray","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Maroon \/ Gray","offer_id":52323476373811,"sku":"B43195450","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/84673_f_fm.jpg?v=1777840285"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-charcoal-neon-green","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Charcoal \/ Neon Green","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Charcoal \/ Neon Green","offer_id":52323476406579,"sku":"B43195560","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/78932_f_fm.jpg?v=1777840064"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-charcoal","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Charcoal","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Charcoal","offer_id":52323476439347,"sku":"B43195090","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/63222_f_fm.jpg?v=1777840009"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-khaki","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Khaki","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Khaki","offer_id":52323476472115,"sku":"B43195770","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/45002_f_fm.jpg?v=1777840267"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-black-white","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Black \/ White","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Black \/ White","offer_id":52323476504883,"sku":"B43195020","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/45000_f_fm.jpg?v=1777839914"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-multicam-arid-tan","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Multicam Arid \/ Tan","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Multicam Arid \/ Tan","offer_id":52323476603187,"sku":"B43195360","price":9.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/82486_f_fm.jpg?v=1777840363"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-multicam-alpine-white","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Multicam Alpine \/ White","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Multicam Alpine \/ White","offer_id":52323476668723,"sku":"B43195540","price":9.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/82487_f_fm.jpg?v=1777840324"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-evergreen","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Evergreen","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Evergreen","offer_id":52323476701491,"sku":"B43195410","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/84669_f_fm.jpg?v=1777840173"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-cranberry","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Cranberry","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Cranberry","offer_id":52323476734259,"sku":"B43195730","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/84668_f_fm.jpg?v=1777840137"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-coyote-brown-black","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Coyote Brown \/ Black","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Coyote Brown \/ Black","offer_id":52323476767027,"sku":"B43195050","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/82474_f_fm.jpg?v=1777840119"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-black-white-black","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Black \/ White \/ Black","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Black \/ White \/ Black","offer_id":52323476799795,"sku":"B43195510","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/63221_f_fm.jpg?v=1777839934"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-red","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Red","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Red","offer_id":52323476832563,"sku":"B43195700","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/45006_f_fm.jpg?v=1777840513"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-brown-khaki","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Brown \/ Khaki","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Brown \/ Khaki","offer_id":52323476865331,"sku":"B43195550","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/45001_f_fm.jpg?v=1777839952"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-navy-silver","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Navy \/ Silver","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Navy \/ Silver","offer_id":52323476898099,"sku":"B43195340","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/82475_f_fm.jpg?v=1777840419"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-green-camo-black","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Green Camo \/ Black","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Green Camo \/ Black","offer_id":52323476930867,"sku":"B43195610","price":7.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/66781_f_fm.jpg?v=1777840210"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-heather-black","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Heather \/ Black","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Heather \/ Black","offer_id":52323476963635,"sku":"B43195580","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/78570_f_fm.jpg?v=1777840230"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-royal-white","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Royal \/ White","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Royal \/ White","offer_id":52323476996403,"sku":"B43195750","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/63219_f_fm.jpg?v=1777840570"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-heather-white","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Heather \/ White","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Heather \/ White","offer_id":52323477029171,"sku":"B43195590","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/78571_f_fm.jpg?v=1777840249"},{"product_id":"yupoong-6606-unisex-retro-trucker-cap-navy-white","title":"Yupoong 6606 - Unisex Retro Trucker Cap - Navy \/ White","description":"\u003cp\u003eThe Yupoong 6606 is the YP Classics Retro Trucker, the classic structured six-panel snapback that defines the everyday trucker silhouette next to the Richardson 112. It runs a hard buckram-backed front in a 47\/25\/28 cotton\/poly\/nylon twill with a 100% polyester mesh back, a 3.5 inch mid-profile crown, and a Permacurv pre-curved visor, so it holds a logo flat and upright the way a structured cap should. That makes it the trucker a shop reaches for when a program wants the recognised retro snapback at a value price, the default for leather-patch hat brands, ranch and outdoor lines, event and team caps, festival and music merch, and any custom headwear run where the classic curved-bill silhouette and a low unit cost decide the order.\u003c\/p\u003e\n\n\u003cp\u003eDecorating a structured trucker cap is a different discipline from printing a flat tee, and the 6606 is built around it. Direct screen printing and DTG do not apply to a curved structured cap, so the work routes to embroidery and patches. For flat embroidery, the buckram-backed front gives a firm, stable foundation; digitise the design specifically for a cap, run it on a cap frame, and keep the centre logo clear of the front seam. For 3D puff embroidery, the structured front supports the raised foam look that defines the modern trucker brand. The fastest-growing method on this cap is the leather and faux-leather patch: a laser-engraved or debossed patch heat-pressed onto the front panel with a heat-activated adhesive, usually tack-stitched for durability, the look driving the ranch, outdoor, and small-brand hat boom. Woven, PVC, and sublimated patches apply the same way. Heat-applied DTF and screen-printed transfers can press onto the flat front panel, but keep them small and clear of the panel seams and the curved crown, and note they bond to the twill front only, not the mesh back. Sublimation only takes on fully polyester panels, so the cotton and nylon content in the twill front prevents a full-colour sublimated front.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: Yupoong\u003c\/li\u003e\n  \u003cli\u003eStyle: 6606 (YP Classics Retro Trucker Cap)\u003c\/li\u003e\n  \u003cli\u003eConstruction: Structured six-panel mid-profile crown. Hard buckram front. 3.5 inch crown. Permacurv pre-curved visor. Trucker mesh back. Plastic snapback closure.\u003c\/li\u003e\n  \u003cli\u003eFront fabric: 47% cotton \/ 25% polyester \/ 28% nylon structured twill front panels\u003c\/li\u003e\n  \u003cli\u003eBack fabric: 100% polyester mesh\u003c\/li\u003e\n  \u003cli\u003eProfile: Mid-profile\u003c\/li\u003e\n  \u003cli\u003eClosure: Adjustable plastic snapback, fits 21 5\/8 to 23 5\/8 inch head circumference\u003c\/li\u003e\n  \u003cli\u003eFit: One size fits most adults\u003c\/li\u003e\n  \u003cli\u003eColors available: 40+ solid, two-tone and camo colour combinations (check current availability on the product page)\u003c\/li\u003e\n  \u003cli\u003eOrdering: available by the piece or by the case; confirm current packing per case for your colour before a large order\u003c\/li\u003e\n  \u003cli\u003eCare: Spot clean. Do not machine wash structured caps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe reorder note specific to this style: confirm the exact two-tone or camo colour combination before a repeat run, because the 6606 ships in many different front, mesh, and visor colour splits that look similar in a thumbnail, and the camo patterns (Multicam, Poseidon) run as specialty colours that can sell out faster than the solids. Pair the 6606 with the flat-bill Yupoong 6006 when a program wants the same trucker on a five-panel flat visor, and cross-shop the Richardson 112 when a job wants the premium benchmark trucker on the same artwork. TheClothingSpace stocks the 6606 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked colours.\u003c\/p\u003e\n\n\u003cp\u003eBuilding a custom trucker cap program? \u003ca href=\"\/collections\/trucker-hats\"\u003eBrowse all wholesale blank trucker hats\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yupoong","offers":[{"title":"One Size \/ Navy \/ White","offer_id":52323477061939,"sku":"B43195010","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/1079\/9667\/files\/45004_f_fm.jpg?v=1777840437"}],"url":"https:\/\/www.theclothingspace.com\/collections\/curved-brim-hats.oembed?page=13","provider":"ClothingSpace","version":"1.0","type":"link"}